Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Pitiful tool rests made less pitiful

Posts

Pitiful tool rests made less pitiful

#1

Pitiful tool rests made less pitiful

Jerry Hall

>I am not much of a welder and have little likelihood to get better I guess. Here are two rests for my 3520 made of 1" bar stock and a 1/2" mild steel rod. I covered the crummy welds and the awkward 1" bar finger "rest" with wood. This no doubt is not a new idea, nor perhaps even a worthwhile one, but I like the smooth, soft, comfortable feel of the waxed wood for indexing and resting my finders. Elm scrap with thick CA, sanded all to 150 and liberal coating of wax. A little bit of beveling and recessing to make room for the welds underneath. So far so good. Next time I may use angle iron so the wood can be a bit lower and make more room for my finger. Time will tell. At least they look better. Now I have the beginnings of a true "wood" lathe.


img

Re: Pitiful tool rests made less pitiful

#2

They look nice, hope they work

john lucas

>I'm also a bad welder and having a cheap welder doesn't help. Thank god for a good grinder and maybe some body putty to fill some of the pits is all I have to say.

Re: Pitiful tool rests made less pitiful

#3

Re: They look nice, hope they work

Ken

>Looks pretty good to me

Re: Pitiful tool rests made less pitiful

#4

Pretty

Barbara Gill, Remlik VA

>

Re: Pitiful tool rests made less pitiful

#5

Re: They look great, but I suggest .....

Jamie Donaldson

>...that you should have used epoxy or a silicone based glue to secure the wood to the metal. CA doesn't allow for any wood movement, and has a brittle bond that is easily fractured on impact.

Re: Pitiful tool rests made less pitiful

#6

Jamie, What possible impact ?

Jerry Hall

>I guess this means I should not have any more catches? I can do that....Good point tho, epoxy it is when they come off. I n my recurring immediate gratification mode again.

Re: Pitiful tool rests made less pitiful

#7

There nice

Ed Larson

>bring them to the next meeting. Ed

Re: Pitiful tool rests made less pitiful

#8

Re: Hey Jerry- use some nice burl and .....

Jamie Donaldson

>...you could double the price! (;-D)

Re: Pitiful tool rests made less pitiful

#9

Re: Pitiful tool rests made less pitiful

Dave Peebles Lyons, Ohio!

>Hi Jerry,

They look terrific to me... and original, at least I have never seen anything like them before.

When I was turning long spindles I made a 24" long tool rest out of maple for the top and turned some 1" posts for the two banjos. Like you, I waxed them up and they worked great.

I do hope that your welds are just a bit ugly and not weak. I would hate to see one break on you.

Great job on these,

Dave

Re: Pitiful tool rests made less pitiful

#10

Re: Pitiful tool rests made less pitiful

Don Evans

>You mentioned angle iron on next one's so your fingers will have more room? With that statement I must assume you may orient the angle the wrong way and create a hand and finger damaging rest.

There were some produced with angle few years back and several injures resulted, the answer was to fill in the angle with wooden blocks that were cut on front at an angle.

I really should draw you a line drawing of this, but just don't have time at moment.

If you don't know what I'm talking about, email me and I will send you a picture that will explain better.

Don

Re: Pitiful tool rests made less pitiful

#11

Re: Pitiful tool rests made less pitiful

Don Evans

>One last thing, my opinion for what it is worth would be to use clear silicone or the more expensive E6000 glues for your gluing.

These will stay at different degrees of flexibility but epoxy is also rigid like CA.

Don

Re: Pitiful tool rests made less pitiful

#12

Re: Pitiful tool rests made less pitiful *LINK*

Jerry Hall

>Don, Thanks for the glue advice. Makes sense. I do understand, I think, the point you are making on finger traps. I think the example you may be referring to is a rest system sold by Woodcraft. After the injuries they filled in the angle with a piece of acrylic. My thought is that I would do much the same but sculpt it into a nice concave form mimicking the Oneway or Robust shapes. The angle iron would give me the space to do that. I found a video in link below that shows their system. Jerry


Woodcraft Tool Rest System

Re: Pitiful tool rests made less pitiful

#13

Re: Pitiful tool rests made less pitiful

john lucas

>Silicone won't bond well enough and remains too flexible. I use it to glue my mirrors to the wood and it's great for that. Epoxy should work well for what you want to do. I use the 5 minute epoxy. It is more flexible than the the 1 hours stuff.

I would use PC-7 you can buy at ACE hardware and it works really great for that purpose. We glued small rocks to a climbing wall and climbed on them for 2 years until they took the room away from us. We had to chisel them off. Great stuff. I've heard this is the same stuff they glue the reflectors down to the highway with but I have never been able to verify that.