Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

A "NEW" old glue

Posts

A "NEW" old glue

#1

A "NEW" old glue

Ken Haines

>A NEW old glue- A custom door company that supplies me with cut-offs showed me what they use as a filler. As an alternative to CA glue, they use "DUCO" cement. This is the glue many of us used as kids with our model airplanes. It mixes very well into a paste with sawdust, fills cracks and pores beautifully AND after you spread it on- your fingers aren't stuck together. Drying time -depending on temperature is between 5 mins. to 1 hour, you can sand immediately upon drying and so far haven't found wood staining. This is (for me) avail. at ACE & TRUE VALUE hdwr. stores. Sells for about $3 a tube.

Re: A "NEW" old glue

#2

Re: A "NEW" old glue

Barbara Gill, Remlik VA

>I remember that glue!

Re: A "NEW" old glue

#3

Re: A "NEW" old glue

charlie belden

>Don't you have to buy a plastic model in order to be able to buy the glue?

This stuff was a real problem back in the early '70s when teens got into glue sniffing.

Re: A "NEW" old glue

#4

Re: A "NEW" old glue

Ken Haines

>No- apparently it is available through the hardware stores. I didn't have any problem obtaining this and the door co. buys by the gallon. The best thing is that because I teach woodturning at the local community college, my students aren't gluing their fingers together.

Re: A "NEW" old glue

#5

Re: A "NEW" old glue

Russ Fairfield

>That Duco cement is a thick nitrocellulose, similar to lacquer but all solids with very little thinner. Duco has been around since the late 40's that I know of. I bought it because it was cheaper than the stuff lebeled as "Model Airplane Cement" and came in a bigger tube. I am waiting for somebody to use it for finishing a pen.

The glue for plastic models is different. It contains a solvent that melts the plastic.

Re: A "NEW" old glue

#6

Re: A "NEW" old glue

Ken Haines

>Russ- that's correct. The glue for plastic was of a different composition. The manufacturer still makes that recommendation on the tube- 'for polystyrene plastics, use DUCO Model Cement'.

This is something that I have found to be better than anything else so far.

Ken