I was making a pen in amboyna pen today and it had a few voids that I wanted to fill in. Something possessed me to wet sand with thin CA. I love the results! Has anyone ever tried this?
I applied the CA and sanded at 220 before it set. Did 320 grit dry. Wet again with CA at 400 and then 600 and 1500 dry. It is not a glossy finish but it is really smooth and feels...soft and silky.
Yes, I was wearing a faceshield, was standing off to the side and also had on a smock.
>Steve, I do that also, occasionally. It really works, but in a pen of Mimosa the other day, it changed the grain somewhat. I still will do it, because it makes a wood finish look like acrylic. :)
I love amboyna burls for pens, they have a leather look almost in some ways. I do a satin finish on my more rewarding pens that uses CA as the clear coat, but the best finish is best I find with a super clean cut with a skew, seldom do I start below 400 now with the skew.
>haven't tried it on pens but I will occasionally wet sand with an oil finish to fill small voids. I have also used lacquer but you have to sand quick.
>Steve, it's a nice finish but you have discovered something that's been floating around for some time, maybe 10 years or so. There are several articles written on CA finishing, may be one on this site in the articles.
If you like doing pens a lot there is a pen yahoo group, check it out there are some really nice pens on there.
>I've been using straight CA and the CA/BLO finish on pens for a few years. Mostly good results though I do screw up a few (more than I ought but I'm a slow-head). "Sandpaper is your friend!"
What I had never done before was, with the lathe spinning and the abrasive held against the wood, started drizzling CA on the work. This was my Aha! moment. I suppose I could continue applying multiple coats of CA to build up a gloss finish but I generally don't like that for most of my pens. Just my taste. This method sure did wonders on the amboyna burl. I'll be doing a few pens in Manitoba maple burl this weekend. Hopefully I'll get the same results.