chucking something small
mike mcnerney
>I want to chuck a guitar bridge pin & cange the taper from 5 de. to 3 de. they are about 1 1/8 long the tapered section is about 3/4" long
& about 5/32 at he small end & 7/32 at the large. The only idea I have had so far is to drill a 5/32" hole in a hardwood or aluminum block mounted on a 3" face plate & then mount a block in the tailstock live center that has a approx 1/4" hole to a depth of 3/16" in & maybe glue something (fine sand) to give it some friction.
I will grind a 1/2" chisel to a 3 de. angle & scrape it down



