Beall advice sought
Pete in Holland, MI
>Hey all -
Looking into a Beall system for my bowl work. Have searched the archives and have drawn the following conclusions:
1) Independent wheels verses the all-on-one arbor? Seems the all-on-one arbor is a good idea, but too closely spaced together. Thoughts on either mounting system? Has anyone built their own arbor longer than the stock Beall all-on-one?
2) Appears the 4" ID buffer is the better all-around buffer for bowl work, unless you do really small stuff.
3) Lathe or stand-along motor drive both work well. 1725 motor rpm is the preferred motor speed over the 3450 motors.
4) Light applications of the compounds on the wheels are best. Light touch of the wheel to the bowl is better too.
5) Oil finishes need at least a week to cure in good drying weather to be hard enough to buff & not "flow" during buffing.
Any other advice before I start buying components? I own a JET 1642 lathe, by the way.
Thanx !
Pete



