Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Lathe is out of the closet

Posts

Lathe is out of the closet

#1

Lathe is out of the closet

keith zimmerman, Normal, IL

>Well, it was bound to happen...and now it has. I'm finally moving out of my 3 room apartment where my my lathe lived in a 45" x 35" walk-in closet for the past 5 years. I found a 2 bedroom house to rent that's only 1 block from here.

I'll be putting together a small shop in the basement. There is plenty of room and a window that will house an exhaust fan to ventilate. the only drawback is that the ceiling is a little low. At just over 6', only short guys like me will be to move around comfortably. Taller people might get a bit claustrophobic. I take possession this weekend.

I can't wait!

keithz

Re: Lathe is out of the closet

#2

Re: Lathe is out of the closet

john lucas

>Fantastic Keith. My last place was in a basement with a low ceiling. It doesn't slow down short guys like us.

Re: Lathe is out of the closet

#3

Re: Lathe is out of the closet

Ken

>WTG hope you get it setup an some good turnin in.Well the good thing about a low ceiling is it don't take as much to heat it.

Re: Lathe is out of the closet

#4

Re: Lathe is out of the closet

Lan Brady

>Keith,

This is great news. You will ready for more wood and bigger machines. Gotta fill the space!!!!!

Cograts, Lan

Re: Lathe is out of the closet

#5

Re: Lathe is out of the closet

Dave Peebles Lyons, Ohio!

>Hi Keith,

That is great news.. Congrats. You have done a lot of great work in a small space, I am sure it will be terrific to have a little more elbow room.

I am happy to here you have finally come out of the closet.:)

Best wishes buddy,

Dave

Re: Lathe is out of the closet

#6

Mike Stafford

Re: Lathe is out of the closet

Mike Stafford

>Congratulations Keith. It will be great for you to have a dedicated shop, er, studio.

Just notch out those floor joists so folks over 6 feet will have enough head room. It shouldn't be much of a problem.....

Re: Lathe is out of the closet

#7

Re: Lathe is out of the closet

Jim Shaver - Oakville, Ont

>Good for you Keith!

Be Well,

Jim

Re: Lathe is out of the closet

#8

Re: Lathe is out of the closet

Cyril Griesbach

>Congratulations, Keith. Now you'll also have more wood storage room as well and just in time for your new lathe. Just put in a chair for when taller folks visit.

Re: Lathe is out of the closet

#9

Re: Lathe is out of the closet

Don Orr

>Good for you ! Enjoy.

Re: Lathe is out of the closet

#10

Re: Lathe is out of the closet

Terry Quiram

>I lived in a house like that once. I could stand up straight if I was between the floor joists. I also had to check for nails before standing up. Congrats Keith.

Terry

Re: Lathe is out of the closet

#11

Dick Hines

Re: Lathe is out of the closet

Dick Hines

>I am sure that your lungs will thank you. Working a closet must have been hard on them.

I know you will love being in the house.

Re: Lathe is out of the closet

#12

Re:Yeah Keith! No height problem for .....

Jamie D

>...we vertically challenged folks, but for your taller friends get some wheelchairs for them to sit in while moving about! That will keep their heads safe and in their place!

Re: Lathe is out of the closet

#13

Re: Lathe is out of the closet

Carole Valentine

>Congrats Keith! Just don't let Dick Hines come to visit...he would knock himself out! LOL

Re: Lathe is out of the closet

#14

Re: Lathe is out of the closet

Pete in Holland, MI

>My basement shop has 6'8" to the open floor joists. A rectangular furnace duct is right over where I stand at my lathe. Tis 6'1" to the underside of this duct. Being I am 6'0", it forces me to keep the floor clear of shavings (at least in the area under the duct) to prevent head collisions :)