Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

turning blank exchange - recipients have been sent

Posts

turning blank exchange - recipients have been sent

#1

turning blank exchange - recipients have been sent

Jason Clark

>If you're participating in this wood exchange you should now have your recipient's name and address. If you signed up and haven't yet received the information please contact me directly.

It ended up easier to match up the participants on a round robin format rather than a straight swap, this means that the person you're sending wood to is not sending wood back to you. (Person A sends to B, B sends to C and C sends to A) This also means that each recipient except for myself will have no idea what wood is headed their way or who it's coming from, adding to the anticipation.

Thanks

Jason

Re: turning blank exchange - recipients have been sent

#2

Packing blanks

Thad

>I'm curious, as this is my first exchange, is there a typical or preferred packing method used - or do most just box up the waxed wood bare?

Re: turning blank exchange - recipients have been sent

#3

Re: Packing blanks

Jason Clark

>I'm packing them with the endgrain sealed with Anchorseal but no additional packing material. I reinforce the seams on the box and use heavy duty packing tape as the contents can be fairly heavy.

Jason

Re: turning blank exchange - recipients have been sent

#4

Re: Packing blanks

arkie

>I'm sending half log sections with the bark on. The cut surfaces are sealed, except where I had to do a small bark trim to fit the box. The whole thing is wrapped in saran wrap. That my be overkill, but the wood is green and I want it to arrive in a condition similar to its current state.

The flat rate box is taped with filament tape, and a little bit of "other" packing tape.