Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

I think this one is a "miss"

Posts

I think this one is a "miss"

#1

Steven Antonucci

I think this one is a "miss"

Steve antonucci

>I had an idea for a bottle shaped vessel, so I grabbed this pice of ash and did this. I am not in love with it, at all. I may just put it back on the lathe and work on the base a bit, since it's about 3/16" thick and there really isn't enough wood anywhere else to cut.

So, what do you do with your clunkers?

Steve


img

Re: I think this one is a "miss"

#2

Re: I think this one is a "miss"

Greg Haugen

>Clunkers? Use them to make S'mores with my daughters in our fire pit.

Greg H.

Re: I think this one is a "miss"

#3

Mike Stafford

Re: I think this one is a "miss"

Mike Stafford

>Somewhat reminiscent of the old earthenware Lancer's rose bottles from my youth, particularly so if the bottom corners are rounded.

Re: I think this one is a "miss"

#4

Steven Antonucci

I think that's where I blew it

Steve antonucci

>I guess that a rounded corner would completely change the look. this one just says "clunk"...

Steve

Re: I think this one is a "miss"

#5

Re: I think this one is a "miss"

Bill Neddow------WebKitFormBoundary+w+uCg3oRve3I+f

>Why not turn it into a table lamp, Steve. You want those to look very stable. Add a little weight, if you have to, by pouring something heavy in.

Re: I think this one is a "miss"

#6

Re: I think this one is a "miss"

Roger

>Glue a plug in the opening, remount it on lathe, turn away the present bottom, turn it upside down, you have a vase.

Re: I think this one is a "miss"

#7

Re: I think this one is a "miss"

Texian

>Save it for pyrography practice. Actually mine is just woodburning, but found use for two "burn pile" bowls that have been gathering dust on a shelf for years.

Re: I think this one is a "miss"

#8

Re: I think this one is a "miss"

john lucas

>Steve Just needs a little surface decoration. I would take just a hair off the bottom at an angle so that it appears more like a separate piece. right now it looks like it's anchored to the surface. I little detail right on the edge will give it just enough lift to seperate it from the table. Then I'd play with some surface design ideas. I would go with an antique steel look. It reminds me of something industrial.

Re: I think this one is a "miss"

#9

Re: I think this one is a "miss"

charlie belden

>Two possibilities that come to mind.

For stand alone, put a slight chamfer on that sharp flat bottom edge. Sharp edges chip off or get worn off after a while, which is why things get chamfered or rounded.

If you go the lamp route, turn a base for it to fit in since the bottom's flat and maybe a bead or bead, cove, bead, long cove to a wider diameter and bead at the bottom.

. . . . .C

. . . . . )

. . . . C

. . . /

. . /

. C_______

Re: I think this one is a "miss"

#10

Re: I think this one is a "miss"

Juergen

>Not all is lost. Just add a needle scaler, some gray primer, red dye. and finish with a coat of lacquer


img

Re: I think this one is a "miss"

#11

Re: I think this one is a "miss"

jim miles - Charlote NC

>Sit it on the shelf -Inspiration will come sooner or later !!

Re: I think this one is a "miss"

#12

Re: I think this one is a "miss"

Rick Allen

>I see industrial.

Look at industrial objects and see what "adornment" could be added to embrace the industrial impact the piece has.

It is quite possible that making a couple of rind to slide over the piece could give an electrical power transmission insulator quality to the object.

Re: I think this one is a "miss"

#13

Steven Antonucci

I like that look!

Steve antonucci

>I wasn't thinking of that when I started, but I think this look is a great fit for the form. I'll probably use my normal patina recipes to get to that texture and color, but that works!

Thanks

Steve

Re: I think this one is a "miss"

#14

Don't Rush to Judgement

Don Orr

>Don't be in too much of a hurry to toss it in the fire pit. Sit with it some. You already have an idea of where to go with it. Looking forward to the end product.

Re: I think this one is a "miss"

#15

Re: I think this one is a "miss"

Eduardo sarmiento-hall

>Steve just look at,some of the galleries in wow and the ideas will come to you,like cutting and reposicion the pieces,inter loking rings etc,just blow your mind maybe something great comes out of it,lol

Re: I think this one is a "miss"

#16

I forgot to mention

Juergen

>I sanded back the primer on high spot and then applied the red dye.