Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Wedding Goblet

Posts

Wedding Goblet

#1

Wedding Goblet

Colin

>I was recently commissioned to make another Wedding Goblet. This one was turned from Bubinga and Sycamore and then laser engraved by a company in the UK.

Comments welcome.

Below is the letter that i send with these to explain the symbolism involved:

This is a traditional wedding goblet (NOT FOR USE though). It is made from a piece of Bubinga and a piece of Sycamore laminated together to get the two different colours of wood. There are two items of symbolism involved in the making of the goblet.

1. It is made from the two different coloured pieces of wood to signify the joining of two people into one family through marriage. The goblet is made (as close as I could manage) half from dark and half from light wood showing that both partners are equal in marriage.

2. The interlocking rings signify the giving of rings in the marriage ceremony and by being interlocked on the stem of the goblet and thus irremovable that the union is forever.


img

Re: Wedding Goblet

#2

Re: Wedding Goblet

john lucas

>Colin I saw this posted on WOW but didn't have time to respond. Very nicely done. I think they will cherish it.

Re: Wedding Goblet

#3

Re: Wedding Goblet

DC Powers

>Very nice. I've seen capured rings before, but not interlocking.

Any tips on how to do this?

Thanks.

Re: Wedding Goblet

#4

Re: Wedding Goblet

Colin

>Thanks for the comments.

The rings are turned separately from a piece of close grained wood that I had lying around (sorry don't know what it was) I then crack the ring in one place across the grain by squeezing it gently in my bench vice. I then paint them with gold acrylic and once dry carefully stretch them over the stem and thread one through the other. A little thin CA glue then puts the ring back together and if necessary a little more gold acrylic paint over the joint. I have found that making proper captive rings with the laminated wood to be a real challenge due to the different grain structure. To get them interlocking I would have to crack one of the rings in any case so I have found this way to be the easiest and quickest.

Now I have given my secret away I hope to see some more goblets with intertwined rings ;)

Re: Wedding Goblet

#5

Re: Wedding Goblet

bernie feinerman

>There was an article in Woodturning a year, or more ago, that detailed making a goblet with carved interlocking rings. I made one whose rings were no where near as elegant as yours but where not broken and reassembled.