Way off topic
Bill Crommett
>I need a reference that will tell how to splice fiber optic cable.
No practical reason, just nosy.
Knowledge You Can Build On — Est. 1998
Way off topic
Bill Crommett
>I need a reference that will tell how to splice fiber optic cable.
No practical reason, just nosy.
Re: Way off topic *LINK*
Barbara Gill, Remlik VA
>Here is one link.
Splicing Fiber Optic Cable
Barbara's link
Steve Kubien
>I was going to suggest a thin kerf parting tool but Barbara's link will work too. To each their own....
Steve
Re: Way off topic
Dick Hines
>I learned to splice fiber optic cable in 1984. The whoe process has changed a bunch since then. I guess you still need good eye sight, we had to take an eye test before AT&T would send us to school. Along with good sight you need good steady hands.
Re: Way off topic
Jeff Rich
>I think Panduit has some information on splicing fiber.
if it is for decorative purpose, epoxy would work.
I know there are butt splices and fusion methods if you are doing it for data work.
I have to go through the hands on training soon for fiber connectors for certification doing data work.
No answer but,,,,
Barry Irby
>Years ago I saw a crew installing fiber optic cable along a railroad right of was. They were out there splicing the cable. The truck was set up beside the manhole and they had pulled the cable up and out to the manhole and into the truck. They had some sort of machine that did the actual splice. Not much for me to actually see, except that I was fascinated by the fact that they had enough slack to do the work in the truck rather than in the man hole and that they had run the cable into the back of the truck and out the side. I asked how they got it out of the truck once they finished the splice. It did not appear the corner post of the truck was removable. They insisted they just coiled it up and put it back into the manhole, Yeah,butt what about the truck? they finally stopped and looked. It was a classic Oh! sh@t!! moment. As I drove away they were cutting the cable and starting over.
Re: No answer but,,,,
Bill Crommett
>Thanks for the laugh, Barry. I thought the only place we had that kind of mentality was in the various legislatures.
Re: Way off topic
Bill Crommett
>Thanks, Barbara. Now I have to learn more, like how many fibers in a 1 1/4 in cable. The reason for the question was that on our way home the people were burrowing with one of those slanted pipe burrowing machines and pulling in lengths of orange cable, but there were many stubs of orange cable sticking out of the ground. Thus my question about splicing.
Re: Way off topic
Dick Hines
>Bill the orange "cable" you see sticking out of the ground is interduct. After all the interduct is installed the fibers are pulled through. The interduct protects the fiber.
You may also see black cabel sticking out of the ground. That is copper cable. After the cable is all installed and spliced you may see a light green post sticking outo of the grough. The splices will be inside the post. Or the splice will be bured and you will not see anything.
Re: Way off topic
Bill Crommett
>Thanks, Dick. You have solved my problem, because this morning on the way back from the lab they had a massive bunch of black cable (or wire or tube ) laying on the ground where the orange tube ended. Who would have thought that my nosy highway problems could be solved on the woodturning site ?