SCREWED AGAIN!!!!!!
Don Pencil
>Any sissy can use "high dollar" screws and the like to mount a block to be turned on the lathe, but real men just duct tape it to the spindle.
Knowledge You Can Build On — Est. 1998
SCREWED AGAIN!!!!!!
Don Pencil
>Any sissy can use "high dollar" screws and the like to mount a block to be turned on the lathe, but real men just duct tape it to the spindle.
Re: SCREWED AGAIN!!!!!!
john lucas
>A real man would just spit on the faceplate and slap the wood on there. :)
Re: SCREWED AGAIN!!!!!!
Texian
>A lot of people believe a lot of stuff that isn't true. It's their story and they are stickin' tuit.
Re: SCREWED AGAIN!!!!!!
jim miles - Charlote NC
>No a real man would spin it between his fingers and cut the wood with his teeth !!!
screws
Philip Duffy
>I just order them to mount up, and they stay put! Phil
I just tear the wood off with my fingers- no lathe
Steve antonucci
>required.
When I do use screw, I turn them in by hand. Not with a screwdriver, just my fingers...
S
Re: SCREWED AGAIN!!!!!!
Don Pencil
>NOW WE'RE GETTIN' SOMEWHERE WITH THIS.
Re: SCREWED AGAIN!!!!!!
steve worcester
>I get it so upset the wood fuses, then I sic the trained worms onto it and they shape and hollow.
trained termites
john lucas
>Steve When asked how I hollowed ornaments I told a lady that I coat the outside with a special chemical that penetrates the wood 2mm. I put termites in and they eat away all the non treated areas leaving the ornament 2mm thick. Later I was eating lunch in the food area and overheard her telling her husband how I hollowed ornaments. Maybe I shouldn't have done that.
Re: trained termites
steve worcester
>With the cost of training and union wages, termites are too expensive. Then they go on a bender and eat half the shop. Good help is hard to find.