Grizzly 3/4 HP Mini Lathe
Sam Scalzo
>Has anyone tried the new 3/4 HP VS Grizzly midi lathe? If so, what do you think of it? I ordered one but they are out of stock till May 15th. Sam
Knowledge You Can Build On — Est. 1998
Grizzly 3/4 HP Mini Lathe
Sam Scalzo
>Has anyone tried the new 3/4 HP VS Grizzly midi lathe? If so, what do you think of it? I ordered one but they are out of stock till May 15th. Sam
Re: Grizzly 3/4 HP Mini Lathe
john lucas
>Our club president has one. It's a very nice machine. I would love to do a comparison between the Jet, Grizzly and new Delta.
Re: Grizzly 3/4 HP Mini Lathe
Gordon Seto
>The tool post is on the right side of the banjo, would that prevents the tool rest getting close to the rim when turning bowls near the capacity of the swing of this lathe? Most other lathes have the tool post on the left or center of the banjo.
Re: Grizzly 3/4 HP Mini Lathe
Rob Wallace
>Good observation Gordon!
Perhaps the result of a dyslexic design engineer when setting-up the casting for the banjo?
Rob Wallace
Re: Grizzly 3/4 HP Mini Lathe
KEW
>I think the "wrong side" banjo/post is so it would be on the "right side" for the outboard turning option. Personally, I think they should have split the difference and kept it in the center of the banjo.
Re: Grizzly 3/4 HP Mini Lathe
Sam Scalzo
>Thanks for all your coments. I wonder if one could change the banjo so the tool rest is in the center? If that is the only negitive feature, it should be a good lathe for the money.
Re: Grizzly 3/4 HP Mini Lathe
Gordon Seto
>Grizzly has so much confident in their lathes that it has only 1 year of warranty. Jet and Delta has 5. Don't just compare the initial price.
Re: Grizzly 3/4 HP Mini Lathe *LINK*
Rob Wallace
>Sam:
Have a read of the recent thread below - although it's not specifically for the mini-lathe, the general comments about the quality of Grizzly lathes is telling... I would also heed the advice about not looking at the price as the discriminating factor about "quality"..... save a bit more money if needed to buy a lathe with more of a track record and better QC & warranty; I have serious reservations about advising anyone to buy a Grizzly lathe.
Rob Wallace
Link to AAW Forum - Grizzly vs. Powermatic Thread