Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

glueing ebony

Posts

glueing ebony

#1

glueing ebony

Steven Kubien

>Me again,

Question #2 for the day... Can I use epoxy to bond two pieces of ebony together or should I use something else? I have a piece of 1/4" stock and I need to laminate two layers of it for a collar.

In fact, I have already done this and it de-bonded. Perhaps I didn't leave it to cure long enough (about 45 minutes for 5-minute epoxy). Should I use medium or thick CA?

Thanks,

Steve

Re: glueing ebony

#2

Steven Antonucci

I use CA

Steve antonucci

>

Re: glueing ebony

#3

Dick Hines

Re: glueing ebony

Dick Hines

>I use acetone on the ebony and blackwood before I use the CA. The acetone gets all the oils out of the joint.

If you don't want to use acetone get some nail polish remover. You can get that with out acetone.

Re: glueing ebony

#4

Yellow Glue....

Wally Dickerman in Arizona

>

Re: glueing ebony

#6

Keith Tompkins

Re: glueing ebony

Keith Tompkins

>Hey Steve, forget the five-minute epoxy. No good for anything but temporary bond. Even high quality epoxy leaves a glue-line that's far too heavy for my taste. I've found that titebond 1 works just fine for ebony, blackwood is harder to glue.

Re: glueing ebony

#7

Steve Kubien

Re: glueing ebony

Steve Kubien

>Thanks Keith