Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Turning day at my shop

Posts

Turning day at my shop

#1

Turning day at my shop

john lucas

>I hosted the Mid Tenn woodturners and Cumberland woodturners to day. We had a great time. Turnout was light but those who showed up had a good time. It's fun sharing ideas and techniques and of course the friendship is the best part. I demonstrated the captured boring bar system so now I will probably have to host a building a boring bar day. I was surprised how many had never seen anything like that. I guess I'll have to set up a club demo on captured bar hollowing.

If there is any way your club can host things like this, do it. We have so much fun. We do a spring turning day at my shop and a fall family picnic at another turners farm. Those and the annual christmas party are the highlights of the year.

Re: Turning day at my shop

#2

Steven Antonucci

We use one meeting per year

Steve antonucci

>It's not a whole day, but we set up 6 or so lathes and just have roving members approach the demonstrators. I'll be making boxes this year.

I agree that most clubs need to have more "turning" and less demo. Folks really enjoy making shavings.

S

Re: Turning day at my shop

#3

Rob Wallace

Re: Turning day at my shop

Rob Wallace

>Hi John!

For the past two months (February and March) our turners group focused on 'toolmaking'. At our February meeting, we went through a production line style operation of drilling, grinding, and tapping 3/8", 1/2", and 5/8" mild steel square stock to hold HSS cutters for hollowing. Members made a hollowing 'set' and now have a few inexpensive boring bars (straight and 45-degrees) for small hollow forms. Last month, we all brought 1/2" round stock, and made clones of the "Hunter" carbide insert tool. Everyone seemed into the toolmaking aspect of these operations, and quite a few members who normally don't participate very much were there grinding, filing, drilling, and tapping. These hands-on activities are a great way to build club spirit and allow members to meet each other as they provide mutual assistance when they are working together on a common project. We likely will try another tool-making session at a future meeting.

Rob Wallace

Re: Turning day at my shop

#4

Re: Turning day at my shop

paul waddle

>Sounds like you had an enjoyable gathering. If you do have a boring bar/captured turning "make it day",send me an email,I'd like to come down from Louisville.. Keep up the good work... pw.