Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Latest piece

Posts

Latest piece

#1

Latest piece

Ellis Walentine, Host

>I just thought I'd post a shot of my latest turning, a spalted curly hard maple pot, about 8" H x 8 3/4" �. Walls are in the 1/4" range. There's no punky wood anywhere in this pot, but there is a bit of surface checking or crazing on one side, as the log had been exposed to the weather for a while and there were a lot of tiny checks on one side. I could have cut them all away if I'd been willing to reduce the diameter another inch or so. The checks have closed up nicely, so I hope it stays this way. So far, there is just one coat of Waterlox on this piece. I'll add more after I let the wood dry out completely.

Thanks for looking.

Ellis


img

Re: Latest piece

#2

very nice

robert davis

>

Re: Latest piece

#3

Looks good

Bob Arnold

>

Re: Latest piece

#4

Steven Antonucci

Finishing question for you, Ellis?

Steve antonucci

>Lovely shape, but I wondered if you were at all bothered by the oil's tendency to turn the maple "yellow"? (I think it's the think I worry about most when finishing spalted maple?)

Thoughts?

Steve

Re: Latest piece

#5

Re:Ellis- you need to work on .....

Jamie D

>...your photo technique! We can't tell much from this shadowed post, and I know where you can find further info already available, on a certain site with which you are intimately familiar! (;-D)

Re: Latest piece

#6

Rationale, probably flawed

Ellis Walentine, Host

>I like the saturated look I get with oil, even though I know it will yellow with age. On a piece like this that has several different colors, I don't find the yellow too distracting.

I have one more blank from this particular log. I may try just hitting it with Krylon Matte finish or possibly some Velvit AquaShield waterbase finish. Those are both water white. I don't know if maple will yellow anyway just because of oxidation over time.

Thanks for bringing it up.

Ellis

Re: Latest piece

#7

Steven Antonucci

Oil vs. "clear coat"

Steve antonucci

>Here are two vessels that I made from the same log, and I think the difference is pretty obvious. (I'm not thrilled with either-BTW)

Oil is way too "yellow" for my taste. This piece is Bush Oil if I remember correctly, but almost all oils do this to maple.

The acrylic clear coat on the other one left the wood the right color, but you do not see the curly figure well, and the overall apearance is "blah".

I would kill for some middle ground that kept the white's white and the browns and figure highlighted. Oh, where art though ye magic elixir?

steven


img

Re: Latest piece

#8

Nah, well maybe

Ellis Walentine, Host

>Jamie, I was going to bed last night and spotted the vessel on my kitchen table so I grabbed a shot with the available light. I had no pretenses of making it a studio-quality shot or I would have grabbed my tripod and headed out to the studio where my seamless and all my lights and stuff live. Too much hassle for a snapshot. And, there's something about the mood and richness of an incandescent available light shot that is hard (for me) to capture in a staged studio shot. Granted, the information isn't complete - i.e., the shape and the shadow detail and the correct color, but that's okay with me.

If I had more room amidst the clutter around here, I'd probably make myself one of those light boxes like all you pros use. I think I'm going to wait until I think my work is worth photographing seriously.

Next time I'm working with lights and backgrounds, I'll take a couple more of this piece.

I know we have a treasure trove of good photo studio info here, thanks to you and John and some of our other photo aces. I do appreciate it.

Best,

Ellis

Re: Latest piece

#9

Re:I expect you to set a good example! (;-D)

Jamie D

>

Re: Latest piece

#10

I'd try Aqua Shield

Ellis Walentine, Host

>Barb Gill should know whether Velvit products are still available. I liked what AquaShield did to this buckeye burl vase. Middle ground?

Ellis


img

Re: Latest piece

#11

It's on my list

Ellis Walentine, Host

>

Re: Latest piece

#12

Re: Latest piece

Jennifer@Indy.USA

>Very nice Ellis. I often wish you would post more of your turnings. They are so nice to see. I feel lucky to have a gorgeous one of yours adorning my living room!

Jen :)

Re: Latest piece

#13

Strong Work Boss !

Don Orr

>

Re: Latest piece

#14

Don't change a thing Ellis

Dave Peebles Lyons, Ohio!

>Very nice piece Ellis,

I happen to be one of those people that like photos like this. I like the play between the piece and the shadows. If I want shots for a gallery I will call on Jamie or John to shoot them. They are great!! But for this old timer on this wonderful forum.. Just post what ya got. It's all good for me. :)

Dave

Re: Latest piece

#15

Re: Latest piece

Terry Scott

>Hi Ellis ,Thats a pretty piece of timber ,and I like the shape ,thsi is the first piece of yours that I have come across ,is there anywhere I can see some more.

I am always interest in how people finish their work ,my only concern (from experience ) with oils is in a years time or so the work looks like it needs a good drink .I lacquer every thing know as i know it wont come back

If you use an acyclic lacquer the colours will stay the same.Time does age the wood but for a while at least you are safe

Cheers