Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Albuquerque Symposium HELP!

Posts

Albuquerque Symposium HELP!

#1

Albuquerque Symposium HELP!

GalenV in Iowa

>If my health holds (failing bypasses on heart) and my sister's (pancreatic cancer), who lives in Albuquerque, I am hopeful I can attend the AAW symposium while visiting her in June. Yes, we are a pair and she would like to see at least the gallery of turnings.

My question:

Having never atttended such a function I am at a loss to plan what my daily activities might be. I have printed out the rotations and list of vendors/manfactures. Some 15 demostrations going on at the same time.

How do you decide how much time you view the gallery, walk through all the vendor area and a full schedule of demonstrations.

It looks like you could spend morning till late afternoon trying to catch the demostrations and the same with vendors/manf. area.

I cross out demostrations that are of less interest and maybe more advanced but there still does not look like enough time. My heart may dictate how long I can handle the day anyway.

If you find a demostration is not appropriate for your learning level is it considered poor manors to leave during the demostration or do people actually move from one to another during the rotation hour and a half?

Any suggestion would be helpful.

Thanks

Galen

Re: Albuquerque Symposium HELP!

#2

Bill Blasic

Re: Albuquerque Symposium HELP!

Bill Blasic

>Galen,

I hope that your health and that of your sister will allow you to complete your plans of attending this symposium. Everyone who turns should attend at least one of these. First if you have any doubts about a rotation sit in the back where you can leave without disturbing anyone. At most rotations people go in and put something on a chair to reserve their place, good or bad that is how it seems to work. One thing to remember is that with the rotations, the Instant Gallery, and the Trade Show you are going to be suffering extreme information overload. I need at least two hours minimum for the Instant Gallery and the Trade Show needs even more than that (There are usually demonstrators on the trade floor). As far as the rotations go I have never seen a bad demo and some of them reach standing room only very quickly, again Info Overload! Make sure you take a camera, a note book, and having business cards will help with the great folks you will meet. I do hope that you will be able to attend as KI'm sure you will find it a great experience.

Bill

Re: Albuquerque Symposium HELP!

#3

Re: Albuquerque Symposium HELP!

John Veerkamp,Western Mo

>Galen,

Like Bill, I hoep your health will allow your participation. As to the demo's. Even if you think one is beyond your skill level You'll not be wasting your time. I've never gnoe to a demo that I didn't learn something of value. Perhaps only an insight on what I was doing wrong, but often these insights lead to great enhancements in creative ideas and skill level. The only time I'd leave is if you had another at the same time that you also wanted to see badly and this one didn't work for you.

John

Re: Albuquerque Symposium HELP!

#4

Steven Antonucci

A Symposium Survival kit

Steve antonucci

>I've only been to two smaller Symposiums, and I know what you mean! Here is my recipe for getting out with the most value:

1.) Don't try to see everything. You can't. It's impossible.

2.) Assume that walking through the Instant Galley will take 2X longer than your best guess. Here is why: a lot of turners will be walking through with you, and many times you will find a piece and its maker co-located. I spoke to a Canadian turner name Claude Letheiq (SP) who turned Chinese puzzle balls for 20 minutes.

3.) Plan to meet people. If you know WC folks are going to attend, block out an hour or four for dinner or lunch. You will get "rotated out" after so many sessions, and want the break, so put it to good use.

4.) Mix up your sessions! If you turn bowls, go see hollowing. If you hollow, go see multi axis turning. Try to find something new, and you'll stay fresher, longer...

5.) Plan on spending 2X time in the vendor area, too! It's another great learning spot, as you can talk to folks about things while people clog the rotations.

6.) TALK TO PEOPLE. Introduce yourself to anyone, most turners are exceptionally friendly folks. It doesn't matter what your name is or their name is, the Symposiums are great ways to learn, meet, grow as turners.

7.) Might sound crazy, but I plan on a 50/50 split between rotations and "not rotations'. Remember point #1- you can't see everything! so strive for quality over quantity. Best thing from my last event? Dinner with Ellis and the gang, talking to Molly, Doug, and Ruth in the Vendor area, lunch with Mike Foster... all while rotations were going on!

Good luck, take it slow, and try to enjoy it!

Steve

Re: Albuquerque Symposium HELP!

#5

Re: A Symposium Survival kit

GalenV in Iowa

>Thank you all for your input. Nice to be aware of the "reserved" seating that I might run into. I've got two memory cards and batteries for my digital camera as I figure I'll need that.

Having been a structural and mechanical engineer all my life I'm finding it harder to even read my own sketches but a notepad will be at hand. Staying with my sister means I might be able to put a little more on my Visa card and not feel TOO bad about it. I'm still trying to learn more about who's who by visiting web sites. Demostration titles are a little hard to determine what the overall presentation may cover. I did purchase some tools from Doug Thompson and after being shown how to use his detail spindle gouge on hollowing boxes the tool may not be properly named. I see he is to be there.

Thanks again all

Galen

Re: Albuquerque Symposium HELP!

#6

Re: A Symposium Survival kit *LINK*

Ed Davidson (Colorado Springs)

>Galen,

Here are some helpful symposium attendance tips from those who have been there - click on the link below.


Symposium Tips for First-Time Attendees

Re: Albuquerque Symposium HELP!

#7

Keith Tompkins

Re: Albuquerque Symposium HELP!

Keith Tompkins

>Hi Galen, I also hope your health holds up! Here's a hot tip...hang out in the bar area after the first day's demos. Everyone will be talking about "what was good...what was bad, what NOT to miss". On Sunday, go to the demos people raved about. I spend most of my time in the instant gallery, which interests me the most. It's a great experience!

Re: Albuquerque Symposium HELP!

#8

Re: Albuquerque Symposium HELP!

Wally Dickerman in Arizona

>Keith, My 3 main interests at the symposiums are the instant gallery, the trade show and socializing. I've been around the turning scene for so long that I know a lot of people, and it's great to renew old friendships and make new ones. I do manage to take in a few demos.

Wally

Re: Albuquerque Symposium HELP!

#9

Keith Tompkins

Re: Albuquerque Symposium HELP!

Keith Tompkins

>Me too, Wally. by hanging out in the IG, I always run into someone I know. Heck, it's impossible to walk down the hallways without meeting someone you know. One of my demo career highlights is that you took the time to attend one of my demos. Thanks, Wally!

Re: Albuquerque Symposium HELP!

#10

Re: A Symposium Survival kit

GalenV in Iowa

>Ed

Thanks for the link on symposium review comments.

I've watch a few short video clips too on past symposiums.

If all would go as planned will be through your city as I have a step-sister in Colorado Springs with her two daughters. Another night of free lodging, other taking them out to eat. Maybe that is not free then!

Galen

Re: Albuquerque Symposium HELP!

#11

Re: Albuquerque Symposium HELP!

Clay Foster

>Galen,

It's okay to pop in and out of demos, as long as you are discrete. I've never stayed for an entire demo, not even my own.

Re: Albuquerque Symposium HELP!

#12

Re: Albuquerque Symposium HELP!

GalenV in Iowa

>Clay:

"I've never stayed for an entire demo, not even my own."

You mean there was another green horn like me asking stupid questions and you got to a breaking point?

Galen

Re: Albuquerque Symposium HELP!

#13

Re: Clay is a stealthy demonstrator!

Jamie D

>

Re: Albuquerque Symposium HELP!

#14

Steven Antonucci

How long did the crowd stay after you left? :-)

Steve antonucci

>

Re: Albuquerque Symposium HELP!

#15

Re: Albuquerque Symposium HELP!

john lucas

>That's why we locked the doors at the Crossville Demo :)