Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Redbud Box

Posts

Redbud Box

#1

Dick Hines

Redbud Box

Dick Hines

>Here is the same redbud box I posted earlier. I took some advice and changer the handle. I bent it to follow the conture of the top and hammered the wire to give it some texture, put a dark patinate on it and changer the leather to cat gut, not real. How did I do?


img

Re: Redbud Box

#2

Re: Redbud Box

paul waddle

>That is beautiful.. I plan on making a box from Redbud,mainly because the green turns to a nice vibrant brown with sun light..pw.

Re: Redbud Box

#3

MUCH better...

GaryG in MD

>Dick, I liked your "bamboo" box before, but this new lid handle really makes it. Very well done -- you did well to have the patience and understanding to work with the ideas presented here by our very knowledgeable colleagues. That's a take! ...Gary

Re: Redbud Box

#4

Re: Redbud Box

George Van Beynen

>The bending of the handle is a big improvement Dick. The texture and patinating adds a lot of interest. I like it!The smaller gut takes my eyes away from the attachment point. I do still notice the frayed gut on the left, could that be CA glued down? In the future, I would find one done with fine wire, diameter proportional to the handle and lid, interesting also. If copper you could be patinated to match the handle.

Re: Redbud Box

#5

Dick Hines

Re: Redbud Box

Dick Hines

>George, i tried fine wire and did not like the results. I put patinate on the wire but when I twisted it the patinate came off and the copper showed. So after trying other things I went with the gut.

Re: Redbud Box

#6

Re: Redbud Box

matt overton

>Huge difference, nice job!