Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

old post with picture, I hope

Posts

old post with picture, I hope

#1

old post with picture, I hope

Skip Beardsley

>Several days ago there was a discussion about sources of inspiration which prompted me to want to post a message here.

Several years ago during a member swap there was a picture shown of a bowl with inlay done on the rim. I was a beginning turner and was taken by the effect of doing the inlay in such a manner. The only comment be the originator was that they, I think a he, had used the index on the lathe and a router. At the time I didn't even know what a index was or whether or not my lathe had one.

Over a period of time, and by describing the technique to members of our club I figured out a way to start the process. Built a jig to hold the router and made several bowls over a period of time. They have always received wonderful comments when displayed either in our home or when I have taken them out to sell.

All the this brings me back to the post on inspiration. I have long wanted to acknowledge the person who inspired me to go down this path but have never had a picture of a bowl done in this manner, or been able to figure out how to get a picture of one on a post.

Hopefully, some one will remember either who got the original bowl or who made it. I really want to thank the turner who inspired me to go down that particular path.

This is only one of many times I have been inspired by posts on this site and again thank all who contribute here for sharing your knowledge and wisdom with the rest of us.


img

Re: old post with picture, I hope

#2

Brad Vietje

Re: old post with picture, I hope

Brad Vietje

>Atta go, Skip,

Two achievements here -- first, you have defeated the photo-posting demons, and have successfully posed this photo! Second, you've made a real nice bowl there. I've also seen a design with indexed holes drilled in from the outer edge of a thick blank, and filled with contrasting dowels that create interesting profiles when turned. I don't recall -- was that variation part of the same thread about doing this?

I hope you can find out the originator of the idea -- very kind of you to do so, too. Your bowl is a fitting tribute to your mentor.

Safe spinning,

Brad Vietje

Newbury, VT

Re: old post with picture, I hope

#3

Re: old post with picture, I hope *LINK*

Fred Holder

>A nicely done piece Skip. I suspect that Brad is referring to my bowl which was on the cover of the May 2007 issue of More Woodturning magazine. It was a maple bowl with dowels inserted in the rim. The piece sold the first time I put it on display to sell.


img

More Woodturning Website

Re: old post with picture, I hope

#4

Re: old post with picture, I hope

Skip Beardsley

>Fred,

I guess great minds run in the same track. I am not sure I saw your bowl before I did this one which I did about the same time as the one on the original post. :Used the same router jig and bit and just plunged it rather than cutting a dado. As you can see this one is filled with inlace. I like the idea of using dowels. May I use it if I give you credit?

Still hoping to find out did the original one with the inlays as shown on my first one. Really want to make sure they get credit, not only here but when I sell a bowl made like that in the future

Skip


img

Re: old post with picture, I hope

#5

Re: old post with picture, I hope *LINK*

Fred Holder

>Hello Skip,

I can't say that I originated the idea, it just occurred to me when I was making that bowl. (If you feel you need permission, you have mine for what it is worth.) I had some nice dowels that were red, not sure what wood so I drilled indexed holes and glued in pieces of the dowel then turned them off smooth. I liked the effect, but not likely ever make another one.


More Woodturning Website