Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

First box!

Posts

First box!

#1

First box!

Marc Phillips

>This is from a limb I got at the local wood turning club meeting... went to see John Lucas demo and won it in the drawing they had... no clue what kind of wood it is though...

.... anyhoo....

Started off by (finally) reading part of Raffans book on turning boxes... man, so many different things involved in this... really had fun!

It's came out OK.... at least the lid fits well enough for make a POP sound when I remove it... not sure if that will last though when the wood dries and moves around...

Finished with the Beall buff and wax....


img

Re: First box!

#2

... and another pic...

Marc Phillips

>... with it open...


img

Re: First box!

#3

Re: ... and another pic...

Ken

>Very nice piece,you done did good.Very nice piece.

Re: First box!

#4

you did good, marc

robert davis

>

Re: First box!

#5

Re: First box!

john lucas

>Marc Excellent box. It may move like crazy being from a limb but it looks like the pith is centered so it may move evenly. Unfortunately if it's still wet it will quite possibly check. Of course you did an excellent job making it so when you get another good piece you should be able to duplicate this one. Keep it in a place with very little air movement and maybe you'll get lucky.

Re: First box!

#6

Re: First box!

Cyril Griesbach

>Very nice, Marc, I hope it stays this way for you.

Re: First box!

#7

I kinda figgered...

Marc Phillips

>... it would move and stuff... but really wanted to learn the steps and techniques used... You know, all the steps in Raffans book...

I learned a lot on this one and am looking forward to others...

We'll see what happens to it... but the learning was waaayyy more important than the actual piece!

Thanks for nice comments... I feel like I may have added another style of turning for me to enjoy :)

Re: First box!

#8

Re: I kinda figgered...

Eduardo sarmiento-hall

>Well done I make boxes for a living since 1984 learn from ray key and I tell you no matter how good you get there will be many that will scape you,even now i make bad ones fron time to time,but books help but is all practice and more practice,when I get a new wood I usually make a box to see how much the wood will move ,she will tell me if and how to turn the rest,bowls,plates,vessels etc.

Re: First box!

#9

Re: I kinda figgered...

Bob Macgregor

>Marc,

If branch was really symmetrical with the pith well-centered, you have a good chance of the lid still fitting after it dries. I have only turned a few of these pith-centered boxes, but the fit on mine seemed to get looser as they dried. On a couple of the less symmetrical ones, the lid still fits, but won't rotate anymore.

BOB