Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

2nd try on Vicmarc chuck

Posts

2nd try on Vicmarc chuck

#1

2nd try on Vicmarc chuck

Chris H

>About a week ago I posted about how my new vicmarc chuck didn't seem very smooth and I'm sorry to report that the replacement I got in the mail yesterday seems about the same.

I called Craft Supplies support again and spoke with another technician. I was kind of hoping he could look at the one I'd sent back and tell me what he thought about it, but he wasn't able to since they'd already put it back in with existing inventory. (From what he was saying, it sounded like usually the rep who sets up the return has the customer put a note in with the return about the problem so a tech can inspect it, but no one had told me to do that and since it came back without a note, it just got thrown back in to the inventory). He did say that they are kind of rough when they come & for me to try it out for a couple weeks and see if it loosened up. He also said the clicking sound I described was normal.

So, I'll give it a try like he says and hopefully the issue will clear up, but I'm still a little disappointed -grrrr- I thought that Vicmarc would be at a level of quality comparable to Lie Nielsen, i.e. work really well right out of the box!

Re: 2nd try on Vicmarc chuck

#2

Re: 2nd try on Vicmarc chuck

Don Evans

>It is normal for scroll chucks to sometimes make a clicking sound if they are rotated on the lathe with nothing in them. Its nothing but he play in the teeth on the slides.

If you are hearing this with the jaws tightened down on something then I don't know what could be causing it.

Normally there is no reason to have the lathe on with nothing in the chuck. I learned this by accident one day with nothing in chuck while doing something else with it on.

Re: 2nd try on Vicmarc chuck

#3

Re: 2nd try on Vicmarc chuck

Bill Clark

>Thanks for the update Chris. Your evaluation confirms what the rep at CS told me that most of the new chucks they get from Vicmark are rough. Someone better wake up soon or Vicmark will no longer be selling many chucks in the US. As much as I respect CS and their customer service they've really dropped the ball on this issue. They apparently have not contacted Vicmark to complain about the poor quality of their recent chucks and then continue to sell them to the unwary public. Secondly, CS should never simply put any returned item back into stock without a careful inspection. This is sad to see because as I previously posted I've bought 3 Vicmark chucks from CS over the years and all have been excellent quality. The 4th is a very rough and while usable, it's a constant reminder not to ever buy another until someone steps up to the plate and solves the problem.

Re: 2nd try on Vicmarc chuck

#4

Re: 2nd try on Vicmarc chuck *LINK*

Stuart Johnson

>Have any of you that have received bad chucks from CS or others thought about sending copies of these posts or links to the thread to Vicmarc? It seems like word of mouth works much better both pro and con when the manufacture is made aware of issues. My wife and I both make a point in sending emails to both the dealer and the company when we have problems. We do the same for good service and from time to time for good products.


Vicmarc

Re: 2nd try on Vicmarc chuck

#5

Re: 2nd try on Vicmarc chuck

John Peck

>I sent some of the comments to Vicmarc earlier today (4-8-2009). It'll be interesting to see whether they reply.

Re: 2nd try on Vicmarc chuck

#6

Timely Thread

Barbara Gill, Remlik VA

>Someone asked my to suggest a chuck for their lathe. I think my list just got shorter.