Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Redbud Box

Posts

Redbud Box

#1

Dick Hines

Redbud Box

Dick Hines

>Here is the latest box. I used copper again for the handle. The handle is tied on the the brackets with leather. Finished with Watco but not buffed. 6" H X 2 3/4"D.

I posted this on the flat side by mistake. Something round will mess up their minds I guess.


img

Re: Redbud Box

#2

Re: Redbud Box

john lucas

>That's a nice box. Good job. If you move one or both of your lights further to the front of the piece you won't have such a dark line down the middle.

Re: Redbud Box

#3

Mike Stafford

Re: Redbud Box

Mike Stafford

>I like the overall idea. The box form is very good. However I think the leather makes the handle attachment look very bulky and awkward. Perhaps you could replace it on the next one with some very fine copper wire. Braided wire might make for an interesting attachment material.

Just my 2 cents...

Re: Redbud Box

#4

Re: Redbud Box

bill Crommett

>Dick: It won't mess up any minds on the flat side. It is just that too many of them have not matured enough to recognize something with out corners as being worth while projects.

Re: Redbud Box

#5

Re: Redbud Box

Carole Valentine

>I agree with Mike, Dick. In addition, the straight wire handle messes with MY mind. I guess that's why I get confused over on the flat side! LOL I think a slight curve to complement the top of the box would look nice.

Re: Redbud Box

#6

I agree with Carol

john lucas

>I kept looking at the box and decided the only thing I didn't like was the straight handle. If it was bent to match the curve of the top it would be much sweeter.

Re: Redbud Box

#7

Dick Hines

Re: Redbud Box

Dick Hines

>Mike I replaced the lather with wire. I had to use a very thin one. As far as bending the handle now that it has been brought up if I can get it off the brackets, with out breaking them I will bend the wire.

I got out voted with the leather. The vote was 2-1. My wife won. We all know our wives get 2 votes to our one. I have not told her I cut the lather off. She will find out soon enough.

Re: Redbud Box

#8

Mike Stafford

Re: Redbud Box

Mike Stafford

>I will not be held responsible for a lack of domestic tranquility...

I hope you can successfully bend the wire for the handle. I think Carole and John have it pegged. An upward bend will lift the entire look of the box.

That is a sweet design Dick without the handle.

Re: Redbud Box

#9

Re: Redbud Box

Barry Irby

>I am throwing my vote in with Mike and Carole and John. My first thought when I looked at this a day or two ago was that the handle needed to be curved to match the curve of the top. To make it even more complicated it would be nice to see the handle tapered. Either curved and fatter in the middle and rounded on the ends or curved, thinner in the middle with the ends angled so that the cuts are vertical. Go Ahead Dick, make up three or four prototypes and let us choose. Just curved will be better than straight.

Re: Redbud Box

#10

Re: Redbud Box

Bob Macgregor

>Heck, while you are working on Barry's suggestions, why don't you turn some nice beads in the copper handle to echo the pattern on the box sides...just kidding!

Re: Redbud Box

#11

Dick Hines

Re: Redbud Box

Dick Hines

>Bob I did turn some beads in copper wire for a box I posted a while back. I can tell you copper is not as easy to turn as brass.

I have already bent a piece of wire to match the shape of the top. I am haveing trouble getting it ti take the green patinate. My have to go with a different color.

Re: Redbud Box

#12

Re: Redbud Box-PhotShopped Curves

charlie belden

>Took the liberty of PhotoShopping two curved handle ideas mentioned. Just quick and dirty for illustration purposes. Middle one would require a little hammering to flare the ends of the wires a tad.


img