Quiz
Ellis Walentine, Host
>Here's an easy one: What is this and what is unusual about it?
Ellis
Knowledge You Can Build On — Est. 1998
Quiz
Ellis Walentine, Host
>Here's an easy one: What is this and what is unusual about it?
Ellis
It's a photograph :)
john lucas
>
Re: Quiz
Ken Oakley-Sunny St. Cloud, Fla.
>A press to put square pegs into round holes?
Re: Quiz
keith zimmerman, Normal IL
>It appears to be an old wooden vise with manual adjustments. It obviously has a very specific purpose for existing.
keithz
Re: Quiz
Steven Kubien
>Some sort or vise/holder-thingie. Possibly for saddles? Secondary answer is a massive nutcracker.
Steve
It's a dimfolius tool...
Al Neighbors
>and I don't believe I've ever seen one crafted quite as nicely as this one.
Re: Quiz
Bruce in Saint John, N.B. Canada
>Looks to me like an Arbor Press and made of wood. Ellis how many tons will it press before breaking?
Re: It's a dimfolius tool... Call Me Gullible
Barbara Gill, Remlik VA
>What is a dimfolius tool?
Re: Quiz
Dick Coers
>How about a tailstock for a wood lathe with tool rest support?
Re: Quiz
Carole Valentine
>Ellis, I don't have a clue what it is except it looks like some sort of press. Is it made entirely of wood? Looks like it.
Ding ding ding!
Ellis Walentine, Host
>Dick got it. It's a tailstock for an old wooden treadle lathe. The vertical piece at the bottom goes between the two rails of the lathe bed and is secured by the bottom piece and a wedge. The unusual thing about this particular tailstock is the height and depth adjustments of the tool rest holder, the square-bent iron strap connected to that wonderful wing nut. The crank for the tail center is pretty cool, too.
This lathe was powered by a foot treadle driving a 3' flywheel. It probably was capable of up to 1000 rpm or more.
Dick wins the prize. (Our wonder and esteem. :-)
Ellis
Re: Ding ding ding!
Dick Coers
>Oh, it's a "MAJOR AWARD", it's marked FRAGILE, it must be from Italy. I would like to thank my wife, wait a minute she hates my woodworking! I would like to thank Roy Underhill and PBS. All those countless hours of watching Roy finally pays off!!!!!!!!!
It would be nice to see a pic of the machine. Sounds like a gem. I bought a small treadle lathe last year. I made a new spindle so I could use a 4 jaw chuck. Then I found out it takes LOTS of practice to coordinate your leg to the work. Take a heavier cut and you have to push harder, to cut faster is obvious, but it is really an learned skill. I can see why great wheel lathes were more popular. Where's that apprentice anyway? Faster boy!