Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Sierra Click Button Pen (part deux)

Posts

Sierra Click Button Pen (part deux)

#1

Sierra Click Button Pen (part deux)

Jim Rutten

>Ok. So I slept on it. And, as often happens when I sleep on things, I came up with a solution. My problem was that even though I had the nib on this pen protruding the correct amount of length when I clicked it to get it to go back into the pen or clicked it to come out of the pen it would stick once the button was depressed all of the way. I woke up convinced that the problem was the spring. So, I went through my wife's cup 'o pens she gets from going to nurses conferences and started looking at the springs in the click pens. Interestingly enough, EVERY single pen I looked at (remember these are give away pens) had a more robust spring in it then the one that came with the kit. Now it is a fine line because if you get too big of a spring the pen won't click at all. On the fourth try I found one that worked and now the pen clicks. Only problem is I bought ten of these kits and I am not sure I can find 40 click pens to salvage the springs from. Attached you will find a picture of the difference in the two springs and on the next message a picture of the functioning pen.


img

Re: Sierra Click Button Pen (part deux)

#2

Re: Sierra Click Button Pen (part deux)

Jim Rutten

>And here is a picture of the pen. I am not sure what type of wood it is as it came out of my scrap bin. My guess would be cocobola, but I don't remember cocobola having as open a grain as this had. Last week my wife became sick, we are guessing it was food poisoning, while she was at work. Her fellow nurse not only looked after her own patients but also my wife's patients and my wife. This pen is for her. And I defy anyone who says there aren't heroes anymore, since they are as close as your local hospital and they do it everyday.


img

Re: Sierra Click Button Pen (part deux)

#3

Steven Antonucci

Clip springs that came with it (stretch to fit)

steve antonucci

>

Re: Sierra Click Button Pen (part deux)

#4

Re: Clip springs that came with it (stretch to fit

Jim Rutten

>Steve,

I find it slightly scary that most times I understand exactly what you are saying but in this case huh?

Re: Sierra Click Button Pen (part deux)

#5

Re: Clip springs that came with it (stretch to fit

Jim Rutten

>The top spring is the one that came out of the give away pen. The bottom spring is from the kit.

Re: Sierra Click Button Pen (part deux)

#6

Re: Sierra Click Button Pen (part deux)

Grant Wilkinson

>Jim: I can't tell from your picture, but with many of the pen kits, the spring has an "up" and "down" end. If you put it onto the refill wrong, the refill will bind when you try to retract it. If this spring has one end a bit smaller in diameter than the other, be sure to put the spring onto the refill with the small end first. The spring will stay on the refill and not fall off, so you will know you have it right.

Re: Sierra Click Button Pen (part deux)

#7

Steven Antonucci

Your spring problem as I see it

steve antonucci

>A spring is a mechanical device that provides resistance to the pen tip. Most click pens have a small twist mechanism on the end that latches and keeps the tip engaged (spring doesn't do anything). You either need more tension or less tension in the spring to get the tip to fully retract. Since you can't use them as is, try clipping the end loop off of one to see if it makes the problem better or worse. If it's worse, try stretching it slightly. Sooner or later, you'll get a formula that works with the existing springs.

S

Re: Sierra Click Button Pen (part deux)

#8

Steven Antonucci

Rereading the lower thread

steve antonucci

>I think that your issue is that you are probably assembling the kit improperly? These things are made by the score, and to have an entire batch be "wrong" would be very hard to believe.

Have you checked the website for assembly directions? Woodcraft has the instructions for lots of pen kits... might be an easier go of it?

S