>I saw a demo recently where the demonstrator was using a very small chuck(3 jaw I think).
Said they bought it at the AAW Symposium. I can't remember who they said they bought it from. Anyone know who sells these and if they're worth the $$$. Looked neat, but I was in a hurry and didn't ask many questions.
>I have one of the small chucks that I think you are talking about (small 3-jaw chuck, with tommy-bar tightening), shown in the link below. I got mine on sale for less than $ 30 a few years ago, and while I suppose it works OK, I rarely use it - ever. Having a "real" 4-jaw woodturning scroll chuck with pin jaws or extended jaws is considerably more useful than the micro-chuck you ask about.
I suppose it would work OK on small items if the tenons needed were very carefully cut, but the 3-jaws just don't hold as tightly (or securely) as with 4-jawed chucks. You might be better-off going with a Grizzly knock-off of the Vicmarc VM-100 for $ 99 (save-up another $ 40) and if needed, buy a Vicmarc extended (or pin) jaw set, which would have much greater versatility. I could only (possibly) recommend the 3-jaw micro chuck for small, "non-critical" projects, but since I rarely use the micro-chuck I have (...money wasted?), I don't think I could even make an honest recommendation that it's worth the $ 60 they are asking for it. Save your pennies and buy a more versatile chuck.
Curious to know if others have come to the same conclusion.....
>This chuck from pennstate Ind. comes with one set of jaws that has will hold objects as small as a toothpick. I've never seen jaws like this on any other chuck. The vicmarc jaws only go down to 1/4" which is fine for most things.
If you need to occasionally hole things smaller than 1/2" use a drill chuck. You will have to turn a round tenon on the piece but this only takes a minute to make.
Did you mean the BaracudaII or did you mean the micro? The micro is 20% off now and makes it around $100 with two sets of jaws. I don't have it, but just wondering.
>Picked up one a few years back. When jaws are backed out a mite, they can be knuckle busters. One suggestion is to wrap extended jaw sections with tape just before starting to turn.