Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Some finishing advice please

Posts

Some finishing advice please

#1

Some finishing advice please

Marc Phillips

>Hi all

I am proceeding along the road, and would like some opinions and advice on what is the best way to finish this type of bowl....

Sweetgum, green, and a crotch piece... I turned it, let it dry for a couple of hours, then sanded it to 600, soaked it in BLO and let it dry all night.

My questions... how long to dry?... what oil(s) do you use? I use the Beall system... when it is dry is it ready to buff? ... or do you do something else to it first?

I want the best look I can get for these natural edged bowls... not a plastic look like Poly or too shiny like Lacquer,... but some shine would be nice :) ... sorry for babbling... I am sure you know what I am looking to accomplish with these :)

Thanks...


img

Re: Some finishing advice please

#2

Re: Some finishing advice please

Frank C. Joseph

>Hi Mack

Looks good, buff it with a good wax. BLO is a very good base and sealer so just buff it till you get the look you want...

Re: Some finishing advice please

#3

Re: Some finishing advice please

Rick_Allen------WebKitFormBoundaryYXrb1+pveWLLS0TK

>I am not familiar with applying finish to green wood. I will watch this thread with interest for those with more knowledge than I have.

I would let the fresh turned green bowl dry for a few months. Then sand, apply the finish of choice, likely some oil finish. and buff.

Re: Some finishing advice please

#4

Re: Some finishing advice please

Marc Phillips

>Can I use the tripoli and white diamond, or just the wax?

Re: Some finishing advice please

#5

Re: Some finishing advice please

Mike Nelson

>Nice bowl Mark, looks like cottonwood. I use Deft satin laquer spray that can be 'knocked down with steel wool for a softer shine and feel. I put several coats on the bottom and bark one on the inside let it dry for a week or so and buff with the wool. Do not buff bark edge on the lathe...don't ask!

Re: Some finishing advice please

#6

Re: Some finishing advice please

Dinyar Chavda

>Marc:

The best advice re finishing that almost anyone could give you can be found at:

http://www.woodcentral.com/russ/russ3.shtml .

An even better source can be found at:

http://www.woodturnerruss.com/FinishingSecretsVideo-NEW.html This has about 6 hours of video, and I have watched several parts of it multiple times.

I may be wrong, butI don't think that a couple of hours would be enough time to remove the moisture in the wood--others will have to tell you what can be done to "fix" things at this stage.

Re: Some finishing advice please

#7

Re: Some finishing advice please

Al Neighbors

>Just my opinion, but I think you've done about all that needs to be done, except for the buffing. I'd let it dry for at least a week, then buff it with Tripoli, White Diamond, and Carnauba.

Looks like you did a really good job on it. :)

Re: Some finishing advice please

#8

Re: Some finishing advice please

John K Jordan

>I like to let the water dry from the wood before applying oil. If turned thin, it will dry in just a few days. If you have an accurate scale, you can weigh it - it's dry when the weight quits changing.

Lots of different oils will work but I like a danish mixture. I reapply oil several (2 to 6) times and let dry for days between each application. I let dry for a few extra days before buffing. Be careful with the buffing wheels that you don't knock off the bark.

JKJ

Re: Some finishing advice please

#9

Re: Some finishing advice please

Frank C. Joseph

>Just wax now The BLO will cake up and make a mess out of the polish.

Re: Some finishing advice please

#10

Re: Some finishing advice please

Marc Phillips

>"Do not buff bark edge on the lathe...don't ask!"

LOL!!

I was going to tell you about when I used an old terry cloth rag to apply Briwax to a natural edged bowl... but the memory is still too painful :)

Re: Some finishing advice please

#11

Brad Vietje

Just the wax

Brad Vietje

>Marc,

Wood finishing is very subjective -- not right or wrong, but many ways that are different, depending on what you want for results.

There are so many issues at play here that we should start a new thread, perhaps. I would not use Tripoli or white diamond with a natural bark edge; I think you'd get all sorts of gunk in all the little crevasses, and wish you hadn't.

Nice looking NE bowl.

Safe spinning,

Brad Vietje

Newbury, VT