Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Largest and smallest recorded turned pieces

Posts

Largest and smallest recorded turned pieces

#1

Peter Charles Fagg (UK)

Largest and smallest recorded turned pieces

Peter Charles Fagg (UK)

>Friends, I have been trying to find pictures of some of the largest and smallest turned pieces ever made but keep getting lots of useless information! I have one image of a goblet on the anvil of a micrometer but that is all.

Amongst us are there those who have such information at their fingertips?

I would appreciate your assistance, I shall be giving a talk soon and would like to project images of the smallest to the largest known pieces.

Regards, Peter.

Re: Largest and smallest recorded turned pieces

#2

Re: Largest and smallest recorded turned pieces

john lucas

>I did the goblet on the micrometer but that isn't my smallest one. I know I have the photo on my school computer and have it here on a disc somewhere but I have to leave to go to Columbus, Ga this morning for an all day demo tomorrow. I'll try to remember to get it to you on Sunday when I get back.

Re: Largest and smallest recorded turned pieces

#3

Re: Largest and smallest recorded turned pieces

Barry Irby

>There were pictures here of someone turning a very large bowl mounted on the rear axle of a large tractor. Don't remember the details, but they had glued up hundreds of 2x4's to make the blank. There was a website connect to it. May have been 12 or 15 feet in diameter. I seem to recall seeing two such things. One to see if they could turn the largest bowl ever and the other slightly more practical. They were turning the pattern for a hot tub or fountain. I had a link to them, but I had a hard drive crash and lost them.

Re: Largest and smallest recorded turned pieces

#4

Re: Largest and smallest recorded turned pieces

Bruce in Saint John, N.B. Canada

>Peter, check this link out. This turner lives about 200km to the north of me and as you will see he turns large bowls.

http://tigerlilyworkshop.com/Gamwoods.html

Re: Largest and smallest recorded turned pieces

#5

Re: Largest and smallest recorded turned pieces *LINK*

fredbear34

>Here is a link to a story about a large bowl turned using a tractor drive, probably the one mentioned otherwise.


The Big Bowl

Re: Largest and smallest recorded turned pieces

#6

Re: Largest and smallest recorded turned pieces

John K Jordan

>This picture of a Lucas goblet is in the archives. Did you do a smaller one?


Re: Largest and smallest recorded turned pieces

#7

Re: Largest and smallest recorded turned pieces

Jorge Castaneda~Downeast Maine

>Peter,

I just posted a picture of very small work

http://www.woodcentral.com/cgi-bin/turning3.pl?read=204620

Re: Largest and smallest recorded turned pieces

#8

Peter Charles Fagg (UK)

Re: Largest and smallest recorded turned pieces

Peter Charles Fagg (UK)

>Friends, many thanks for all the responses.

Getting my grey cells into gear I seem to remember some Canadian images some years ago of a complete piece of tree bole being turned with the turner almost standing inside? Y/N?

Peter.

Re: Largest and smallest recorded turned pieces

#9

I helped turn one of them...

Ellis Walentine, Host

>Back in my days as editor of American Woodworker magazine, we engaged Stuart Mortimer to supervise the turning of the world's largest bowl, which he accomplished with considerable help from Steve Blenk (R.I.P.) and the rest of our crew in those days -- I believe it was 1997.

Anyhow, we bought a 12-ton sitka spruce log in Gold Beach, Oregon, and had David Borek (remember him?) saw a 6' length off the end and ship it to us at our opening show of the season in Novi, MI. The piece was over 8' in diameter and weighed 5,600 lbs. It took two Hysters to get it off the truck. We spent days chainsawing away as much wood that wasn't a bowl, and then the piece was mounted on a giant Highlander lathe from Scotland, brought in for just this occasion. I got to take a couple turns with the 7'-long bowl gouge Stuart used for the occasion. Nothing like seeing 20' long shavings coming off a two-ton bowl blank spinning at a mighty 30 rpm. It was kinda like riding a motorcycle at 100 mph. DAMHIKT. Scary but exhilarating.

Long story short: Our bowl finished out at 7'-9 3/4" in diameter by I-don't-recall-how deep. Guinness awarded us the record for the World's largest turned wooden bowl at the time. If I can find our copy of the certificate, I'll post it. I am pretty sure we've been eclipsed by now, but it sure was fun while it lasted.

Ellis Walentine, Host

Re: Largest and smallest recorded turned pieces

#10

Re: Largest and smallest recorded turned pieces

john lucas

>John That's the smallest so far, that's the head of a pin on the left. I plan to to a better one. Possibly not any shorter but I'm going to make it look more like a real goblet. I'm going to run some experiments on how thin the stem can go and then adjust the size from there. Gotta get my nerves relaxed real good before I get started on that project.