Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Another use for the Nova outboard rig

Posts

Another use for the Nova outboard rig

#1

Another use for the Nova outboard rig

Carole Valentine

>I had decided the outboard rig I ordered when I got my Nova DVR was a waste of money, but along the way I have found tons of uses for it...none of them the intended use, of course. Here is the latest. I kept the steel rod from my bandsaw when I put the riser block on. Knew it would come in handy someday. (yeah, I'm a packrat!) Just so happens it fits right in the hole for the tool post on the outrigger. So...I made a crude but rock solid control center for the vac system and I can swing it all out of the way when I am not using it or take it out of the post altogether.


img

Re: Another use for the Nova outboard rig

#2

Re: Another use for the Nova outboard rig

Jim Shaver - Oakville, Ont

>Nice work Carole,

Jim

Re: Another use for the Nova outboard rig

#3

Very original Carol

john lucas

>

Re: Another use for the Nova outboard rig

#4

Re: Another use for the Nova outboard rig

Al Neighbors

>That's using the old bean, Carole! :o)

Re: Another use for the Nova outboard rig

#5

Re: Another use for the Nova outboard rig

paul waddle

>Good I idea,but I kept my bandsaw "pole"intact. I started to use it for a shaft,but decided the flat didn't suit. pw

Re: Another use for the Nova outboard rig

#6

Re: Another use for the Nova outboard rig

Carole Valentine

>If you are a true packrat, you'll find a use for it, Paul! Don't throw it away. In this case the flat turned out to be an asset.

Re: Another use for the Nova outboard rig

#7

Re: Another use for the Nova outboard rig

George Van Beynen

>I must be a "true" packrat Carol. I will be starting the addition on the 40'x63' pole building shortly!