Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

preventing ca glue bleeding

Posts

preventing ca glue bleeding

#1

preventing ca glue bleeding

Lan Brady

>I wanted to try a technique to block ca glue from bleeding when used to fill a crack. It was suggested to use a dilute solution of shellac.

I needed a mister bottle. The only one I could find was with hair spray.

You guessed it, I had to try!!!! I used the hairspray on the piece and it worked great.

What is that stuff?

Was it just a coincidence that it worked so well?

I am easily amazed!, Lan

Re: preventing ca glue bleeding

#2

Re: preventing ca glue bleeding

Carole Valentine

>Some sort of water based polymers. Can also contain a type of silicone. Did your finish go on OK?

Re: preventing ca glue bleeding

#3

Hair spray...lacquer?

Ron McKinley

>Hair spray used to be lacquer. I've used it as a spray lacquer in years past but don't know what it is today. ......Ron

Re: preventing ca glue bleeding

#4

Re: Hair spray...lacquer?

Carole Valentine

>Something tells me that those whose mission is to protect us from all things evil or stupid would not allow us to spray lacquer on our heads today. LOL

Re: preventing ca glue bleeding

#5

Re: Hair spray...lacquer?

Mac

>That's what makes mine shine..................

Re: preventing ca glue bleeding

#6

Hair spray or deoderant

john lucas

>My dad came out of the bathroom one time with his arms straight out and said "alright, who put the hairspray where my deoderant goes". Made for a good laugh

Re: preventing ca glue bleeding

#7

Re: Hair spray or deoderant

jared

>I dont know what is in hairspray but my wife has basically ruined the vinyl flooring in our bathroom with it and there is a coating of it on the sink that is about impossible to remove. The stuff ought to be banned. Jared

Re: preventing ca glue bleeding

#8

Re: preventing ca glue bleeding

Norm Smith

>Lan, To keep the CA glue from bleeding I use a spray can of lacquor. I just spray lacquor around the crack or void, when dry , I fill it with whatever, sand the filled and sprayed area and than apply the finish. I produce a lot of pieces that I fill and this always works. Any spray finish should do.

Norm

Re: preventing ca glue bleeding

#9

I paint or wipe on lacquer that.....-

Jamie D

>..has been thinned with a bit of acetone. The acetone aids in penetration, wood hardener for punky areas,and rapid drying, and I use the same mixture as both undercoat and sanding sealer.

Re: preventing ca glue bleeding

#10

Re: preventing ca glue bleeding

Russ Fairfield

>Hair spray is no longer lacquer. What it is might be even worse, but it is more environmentall;y friendly. Hairspray is a polymer called polyvinylpyrrolidine in a htdrocarbon thinner. It is a cousin to the PVC that plastic pipe is made of, and it is also used to glue the layers of wood in plywood together.

Yes, you are spraying glue on you hair.

Re: preventing ca glue bleeding

#11

Re: preventing ca glue bleeding

Lan Brady

>Thanks to everyone. I think I will pour out the hairspray and use a thin coat of lacquer or shellac.

I never would have thought PVA would be the culprit!

Lan

Re: preventing ca glue bleeding

#12

Re: preventing ca glue bleeding

Ed Heuslein

>I've used lacquer successfully many times. Since it's a surface binding finish (thanks Russ), it's easily sanded off after the CA dries. For larger cracks I use paste wax. It works better than lacquer IMHO and can be wipped off easily after the CA dries - no sanding involved.