Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

100 yr old segmenting

Posts

100 yr old segmenting

#1

100 yr old segmenting

mfoster

>I just got back from totally turning and had a wonderful time there. Met a lot of the folks I knew only from the net, and picked up a lot of great ideas and new ways to do the things I already do. Presenters all were great, jimmy Clewes is a hoot to watch. My vehicle somehow came back with a couple new tools (including a Thompson gouge). Funny how that always seems to happen.

I saw a patient today that knew I do some segmented work and thought I might be interested in some candlesticks his grandfather made. This is an older gentleman, and he estimated that the candlesticks are about 100 yrs. old (there is a pair, but he only brought one in). I was really thrilled he brought this in for me to see, and he left it for me to bring home at lunch to get a couple of quick photos. I would guess the glue used is hide glue, and the woods appear to be mahogany, walnut, maple and perhaps cherry, but I couldn't be sure. There is a brass tube in the top to accept the candles. Probably a shellac finish. They have survived amazingly intact in very nice shape and obviously were not used. His great grandfather worked in the Brooklyn naval yards when he made them, about the time the ships being made switched from wooden to steel.

100 year old segmented turnings, how cool is that??


img

Re: 100 yr old segmenting

#2

segmented feet 

mfoster------WebKitFormBoundarydly9q8+XYNh10lxo

>


img

Re: 100 yr old segmenting

#3

Re: segmented feet

Jorge Castaneda~Downeast Maine

>Hi Mike,

That is really cool!

I agree, Totally Turning was a very nice experience met a bunch of Woodcentral fellows. Jimmy Clews is an excellent teacher besides a great turner, I also think highly of Rolly Munro, I enjoyed his demos very much.

Thanks for sharing

Jorge

Re: 100 yr old segmenting

#4

Re: 100 yr old segmenting

Don Evans

>What really amazes me most is how on earth did he get the sides smooth and straight enough to not have a crack some where between them. The center shaft would have to be laminated at angle plus more straight cuts then quartered length wise and reversed then glued back up.

I'd have to have a modern jointer to make the glued up sides that smooth.

Are there some that could do that with hand plane and or scrapers?

Not me.

Don

Re: 100 yr old segmenting

#5

Steven Antonucci

Even more impressive is the form!

steve antonucci

>Spot on in the forms and proportion. I would have guessed it was 50 years or less, and by a master turner with a well known name.

Just goes to show you that there have been great turners knocking out incredible work from their garages forever...

steve

Re: 100 yr old segmenting

#6

Re: 100 yr old segmenting

Texian

>Some would call that laminated rather than segmented. A marvelous piece of work by whatever nomenclature.

Re: 100 yr old segmenting

#7

Re: 100 yr old segmenting

mfoster

>I agree that it really is lamination, but I used the term segmented only in the sense of the intention of the desired final product takes similar thinking when doing segmented work. I stand corrected.

Re: 100 yr old segmenting

#8

Re: Even more impressive is the form!

mfoster

>That was also my thought when I saw this piece. The proportions and the elements of the spindle turning were superbly done.

Re: 100 yr old segmenting

#9

Keith Tompkins

Re: 100 yr old segmenting

Keith Tompkins

>HI Mike, Sorry I missed you at TT!! Congrats on the Richard Pagano Award!! He is missed very much. The laminations used are known as post blocking, a very common approach used by furniture makers to increase the size of a component, such as the bulge in a chair leg. to answer a question below,yes, there are (were?) many craftsmen who are capable of using a hand-plane accurately enough to do such work; I have known and learned from a few of them. If the gentleman who made the piece worked in a shipyard, he probably had access to huge, industrial equipment such as bandsaws and planers. Yes, they were around a hundred years ago. Thanks for sharing.

Re: 100 yr old segmenting

#10

agreed

Tom Sontag - St. Louis

>It is an amazing piece. Thanks for sharing it with us. Not many doubts where he got the mahogany....

Re: 100 yr old segmenting

#11

Good form is why I study antiques

john lucas

>That's a beautiful piece I'm glad it has survived. I love to look at antique furniture and building parts. Part of why they survive is the looks are great so people take care of them. I try to study the little details like how to they make a bead flow into a cove, where are the shadow lines, where is the bulge in any big curve. You can learn so much.

Re: 100 yr old segmenting

#12

Re: Post Blocking

gtwilkins

>Keith,

I have never heard the the term "post blocking" before and I like the effect on the candlestick, and a quick google yielded nothing about the technique.

Do you have any info on how to do the post blocking or where to find out about it?

Thanks Trevor

Re: 100 yr old segmenting

#13

Keith Tompkins

Re: Post Blocking

Keith Tompkins

>Hi Trevor, The technique used to be taught in most high school shop classes, and many older books showed the technique. It is used in industry to conserve wood, for example, a cabinet leg may be post blocked where the tenon is to be located, or where a bulge is required in a turning. Rockwell/Delta used to publish a small book "How to operate your lathe" that showed the technique as well. You can get very creative with this technique; assembled post blocked assemblies can be cut apart and reassembled for very unique results. Try googleing the term for possible results.

Re: 100 yr old segmenting

#14

Keith Tompkins

Re: Post Blocking

Keith Tompkins

>I googled the term as well with no results. I'm sure Ellis is familiar with it, or many on the flat side could help.

Re: 100 yr old segmenting

#15

Great Piece !

Don Orr

>Thanks for showing this wonderful work.

And another huge congratulations for winnig the Richard Pagano award. It's a very big deal for those of who knew Rich. He would be impressed with your work !

Re: 100 yr old segmenting

#16

Re: Great Piece !

mfoster

>Thanks Don, it was an honor and surprise to receive the award.

Mike