Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Need A Turner

Posts

Need A Turner

#1

Need A Turner

Ricc Havens

>My Father-in-law is looking for someone to turn a wagon wheel hub in the Goshen, Indiana area. (He bought, converted and is living in a 1860's barn. I no longer have a wood shop or lathe. But, a few years ago I met a turner in Goshen, IN named Paul Troyer but I don't see him listed in the phone book.

Anyone know Paul or someone else in the Goshen area who might be interested in turning a wagon wheel hub. My father-in-law estimates a minimum 16" swing is needed.

Note: Just a reminder - remove the "AT" and replace with the symbol or the email won't go thru.

Thanks

Ricc Havens

Elkhart, IN

Re: Need A Turner

#2

Re: Need A Turner *LINK*

Ralph

>Rick

What you are really looking for is a wheelwright.

While the hub is turned, and spokes don't have to be (and usually aren't). The wood rim -should- be steam bent, while the iron is put no HOT (and shrinks to fit)

A few years ago I hunted around and found an Amish wright that would build a special order pair for me, except the iron rims were put on in sections.

That all being said, a replica is probably more what he wants, see the link


HF replica

Re: Need A Turner

#3

Re: Need A Turner

Dennis Yoder

>You should be able to find a wheelwright by checking around E. of Goshen toward Nappane. Some of the store or lumberyards would be a good start. Dennis Yoder, originally from Goshen now warm in Florida

Re: Need A Turner

#4

Re: Need A Turner

Pete in Holland, MI

>I live up in Holland, MI. Drop me a line & let's talk.

Pete

Re: Need A Turner

#5

Re: Need A Turner

Ricc Havens

>Thanks for the suggestions on the wheel wrights. He is looking to make a replica. I guess I should have mentioned earlier. He wants the hub turned then he will fabricate the the spokes and rim. It doesn't have to be as exacting as a true wagon wheel as it will be hanging high in the cathedral ceiling of the main barn bay. Thanks for the link to HF but he is looking to make it larger in diameter. He knows tons of Amish as he works with a bunch at his factory. And an amish crew actually disassembled the old barn's timber frame structure and relocated it on the property and reassembled the framework and made some modifications that you would swear were original to the old barn structure. But, the wheel wrights are expensive and he was looking at that as a last resort.

Pete - thanks I'll drop you a line

Ricc