NOVA DVR XP - anyone have one?
Jeff Willaford
>I'm looking at the NOVA DVR XP but would like to hear first hand from anyone who owns one. What is your opinion of this lathe?
Knowledge You Can Build On — Est. 1998
NOVA DVR XP - anyone have one?
Jeff Willaford
>I'm looking at the NOVA DVR XP but would like to hear first hand from anyone who owns one. What is your opinion of this lathe?
Re: NOVA DVR XP - anyone have one?
Ken
>I got the Nova 1624-44 an love it.Know a lotta folks who have the DVR and really like it, havn't heard anything bad about it.
Re: NOVA DVR XP - anyone have one?
Ralph
>If you need a good bowl capacity, small foot print lathe, for a reasonable price. It's a good choice.
If you need a spindle lathe, maybe not.
If you need to buy one extension, there might be better choices (Jet 1642).
If you need to buy many extensions, it might go back to being a good choice.
I really like that the lathe stops, cold, on a serious catch.
It's easy to adapt to a vacuum chuck.
The old (MSN) owners group vanished when MSN shut down groups.
There is a Yahoo Group (see link), there is also a private My Family group that you would need to be a personal invite to join
Re: NOVA DVR XP - anyone have one?
Jeff Willaford
>Thanks Ralph, I'll take a look at the Yahoo group. I will also ask around on WoW which is the other group you referenced.
Re: NOVA DVR XP - anyone have one?
Dick Hines
>Man, it didn't take long for you to move up to a bigger lathe. The next thing you will be looking for a Oneway or a VB36.
Re: NOVA DVR XP - anyone have one?
Ralph
>Actually it's not WoW, it's just hosted at the same web-service.
Re: NOVA DVR XP - anyone have one?
Bill Neddow------WebKitFormBoundary+w+uCg3oRve3I+f
>Excellent lathe for both spindle and bowl work. I have had mine for over two years now and it gets abused as I cart it around for demonstrating and teaching. it is a tough little beast, in spite of the sophisticted electronics. It is definitely the best lathe in its price range. I am not easily i pressed as my other lathe is a Oneway 2436.
Great Lathe
Ron McKinley
>I've had one about 2 1/2 years now and love it. It does everything I ask of it. It's really nice to swivel the head when hollowing out a bowl and I don't have to lean over the ways. Any other questions just ask or e-mail me.......Ron
Re: NOVA DVR XP - anyone have one?
Barry Irby
>I have the older DVR (not XP) and have no complaints. I bought an extension and just bolted it onto the end. It just hangs there. The cabinet I made for the lathe was not long enough to support the new extension and I thought I was only going to make four legs for a table. The guy (Tim?) who runs the service center for them in WV suggested just bolting it on and not worrying about it. Good call. Good lathe. Get up with Tim. (I'm having a senior moment and can't think of the name, but he runs the service center and has lots of stuff you might be interested in, Including perhaps used or rebuilt lathes. And chucks and bed extensions. Go for it.
Re: NOVA DVR XP - anyone have one?
Carole Valentine
>Barry, your extension is just hanging off the bolts??? No support at all??? I can't believe that is not torquing your bed and giving you vibration problems.
Re: NOVA DVR XP - anyone have one?
Jeff Willaford
>Dick, I didn't move .... Just looking.
Re: NOVA DVR XP - anyone have one?
Jeff Willaford
>Thanks.
Re: NOVA DVR XP - anyone have one?
Martin Harris
>I bought one four months ago and love it. (Moved up after only 15 months on a Jet Mini.) Started at 110v but just moved it to 220v and the extra power is very evident. Two weeks after getting it an electronic component failed, but Tim Geiss over-nighted me the replacement and explained the replacement procedure in great detail over the phone.
I've turned 16" bowls and 1" miniatures. As someone else mentioned, the "stop in a revolution" feature is great. Not that I ever have a catch, of course, but it is nice to know it is there:-)
Go for it!
Martin