Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Maple Bowl w/ Inlace

Posts

Maple Bowl w/ Inlace

#1

Maple Bowl w/ Inlace

John T

>This is the bowl that several of you have been helping me with over the last week or so - endgrain tearout and finish problems...

Wood is spalted silver maple, liberated from a neighbors burn pile. Finish is tung oil, shellac and wax.

Haven't turned anything in a while, so there was some re-learning to do. Also, I've never worked with Inlace before, and I'm pretty happy with how it turned out.

The final finish isn't perfect - I can see some swirl marks in the bottom, but my wife thinks I'm being too picky....

I'd appreciate comments and critiques.

Thanks.

-John-


img

Re: Maple Bowl w/ Inlace

#2

Re: Maple Bowl 2 

John T

>


img

Re: Maple Bowl w/ Inlace

#3

Re: Maple Bowl 3

John T

>Bad picture, but just to show th general contour of the bowl


img

Re: Maple Bowl w/ Inlace

#4

Re: Maple Bowl 4

John T

>Thanks for looking!

-John-


img

Re: Maple Bowl w/ Inlace

#5

Re: Maple Bowl 4

Don Tewell in Central Illinois

>I think you do an excellent job. My personal preference is the inlace takes away some of the beauty of the spalting.

Re: Maple Bowl w/ Inlace

#6

Re: Maple Bowl w/ Inlace

Jim K in Trappe, PA

>Very nice!

How do you like working with inlace? I've never used it, but always wanted to try it. Is it a clear liquid, and you add the stones, or is it pre mixed?

Thanks,

Jim K

Re: Maple Bowl w/ Inlace

#7

Thanks, Don

John T

>Thanks for the comments, Don - This bowl was mostly used to get back up to speed with turning, and as an excuse to play around with inlaying.

I agree that generally the wood speaks for itself, and this is a wonderful piece of spalted maple. Someone with more talent than me could have really have made it spectacular.

I just wanted to play with inlaying, and in this case, I'm pretty pleased with the Inlace (especially with the piece "in hand" rather than a computer image). Just wish the finish was better...

After all, the wood was free, and I needed practice. Better than winding up as fireplace ash, I think....

Thanks again.

-John-

Re: Maple Bowl w/ Inlace

#8

Inlace

John T

>Hi Jim -

I thought the Inlace material is great. Easy to work with, and turns beautifully.

The material comes as a thick liquid in whatever color you choose (my background material was called "Lindsay"), but I think a clear or solid color is available.

I embedded some of the "Turquoise Nuggets" also sold by Inlace, and there are various powders, colorants, and metals you could add to the basic liquid.

Again, it all mixes easily, was simple to work with, and turned and sanded like a dream. The only drawback is the odor. This stuff stinks, and the fumes can't be good for you. Recommend a serious respirator, or plan to do the inlay outdoors on a calm day.

I've also seen recipes for using CNA, clear epoxy, and just about anything you can think of to embed in it to create your turning.

Google "Inlay Turning", or "Inlace" to see what's possible.

Or, if you really want to just give up, call UNCLE, and find a new hobby, go to Steven Hatchers site (http://www.stephenhatcher.com).

I don't think he uses Inlace, though....

Re: Maple Bowl w/ Inlace

#9

Re: Maple Bowl w/ Inlace *LINK*

john lucas

>Inlace is a lot of fun and has a lot of possibilities. Check out the link below and you will find a huge supply of Inlace, inlace chips and colorants.


http://www.turtlefeathers.net/

Re: Maple Bowl w/ Inlace

#10

Re: Inlace

Jim K in Trappe, PA

>Thanks John. Great job!