Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Help finishing bowl

Posts

Help finishing bowl

#1

Help finishing bowl

John T

>Desperately need some advise on choosing/applying a finish for a bowl.

Wood is spalted maple, with an Inlace inlay.

I applied pure Tung oil, and let it dry for about a week. On top, I tried varnish, which gives the finish I'd like, but I can't get a good layer without drips, runs, or wavy areas in the varnish.

Problem is, I'm kind of up against a deadline - I promised this bowl for a silent auction at my childrens school this weekend.....

Anybody have a recipe for a fool-proof top finish over oil, that will look OK in 2 days???

I'm thinking spray-on poly, or maybe just butchers wax buffed in??

Thanks in advance for any advise.

-John-

Re: Help finishing bowl

#2

Re: Help finishing bowl

eliot d------WebKitFormBoundaryu+MBDi+0MX0Pf5O9---

>I use shellac-based products over oil all the time. It's more or less a French polish; and you get immediate results. Put the shellac on a paper towel and run the lathe pretty fast so it gets warm. I can't see how you can go wrong.

Re: Help finishing bowl

#3

Re: Help finishing bowl

John Veerkamp,Western Mo

>John,

Over my "use" bowls I just use a good quality wax over the oil. It gives a nice feel and is easily renewed by the owner.

John

Re: Help finishing bowl

#4

Thanks for the replies

John T

>Thanks for the help, Eliot and John -

I sanded off the offending laquer and used clear shellac, "rubbed" on with the lathe at around 1500 rpm. Foudn it was hard to keep it from "sticking" as it dried, and wound up with some uneven spots, and some round streaks, particularly in the bottom of the inside of the bowl, but overall much better than what I was getting with laquer.

Buffed it with wax, and got about the luster I was looking for. Have to finish the bottom, and will post some pictures.

Thanks again for the help. Sure feels like I've got alot to learn.

-John-

Re: Help finishing bowl

#5

Re: Thanks for the replies------WebKitFormBoundary

eliot d------WebKitFormBoundaryu+MBDi+0MX0Pf5O9---

>When shellac sticks, just add a little bit of oil and keep going. That's how it's done by hand in real hand rubbed French polish. On the lathe, if you simply use oil, shellac, oil shellac, etc, it works out perfectly.

------WebKitFormBoundaryTO0NNSTymsA+AEY7