Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Sandblasting?

Posts

Sandblasting?

#1

Sandblasting?

AndiWolfe

>I'm wondering if anyone on the list would know if commercial shops that use sandblasting would be willing to rent out the use of their equipment in their shop? I'd like to do some sandblasting, but I don't have the space or equipment to do it in my shop.

Does anyone have any experience with this sort of thing?

Re: Sandblasting?

#2

Re: Sandblasting?

Dale Cook

>Hi Andi,if you have any stained glass shops in your area you might want to check with them. I did that up here in Fargo and they had a large sandblasting cabinet they used for etching glass. It was only used for etching glass so the medium stayed fairly clean and didn't discolor the wood. I'm not sure but I would think that a cabinet used for rusty metal or something dirty might get blasted into the wood. Good luck.

Re: Sandblasting?

#3

Re: Sandblasting? *LINK*

Dick Coers

>Dale is right, you have to watch what media is being used. Glass beads are safe, as is aluminum oxide. You have to stay away from the slag based, as it may "stick" in any open pores. Now if you're using walnut, no problem. Someone with a "clean" cabinet may not be interested in letting you blast wood. You will be leaving wood fiber in their media, and they might not like that. You'll also have to be cautious about the big blasting guys that do signs. They just about use a fire hose to carry the air. If you are planning on small work, you could use one of the small blasters inside a visqueen tent. Wear some gloves and put your arms inside the visqueen bag with the turning.


gravity blaster gun

Re: Sandblasting?

#4

Re: Sandblasting?

-e-

>also, check out your local college metal casting/sculpting programs -- often they have sandblasters for metal. and you only have to bring your own glass beads for wood blasting.

Re: Sandblasting?

#5

Re: Sandblasting?

Dale Stansbery

>Check out the rental section at Lowes. They have a large catalog of rental equipment besides the big stuff you see sitting outside. If it's not at their store, they can get it. Sand blasters may be included, though they may not have small enough ones to be practical for your application.

Re: Sandblasting?

#6

Jesper, Denmark

Re: Do you really need it????

Jesper, Denmark

>Some of the effects of sandblasting can be achieved with wire brushing.

Manually or rotating in a handdrill. If you like the effect, you can always take the next step.

Just a thought.

Re: Sandblasting?

#7

Re: Sandblasting?

John K Jordan

>Andi,

This doesn't answer your question, but you can get a very inexpensive sand blasting tool ($20 or so?) from a big box tool. I've sandblasted outside in a cardboard box to save most of the sand.

JKJ

Re: Sandblasting?

#8

Re: Do you really need it????

Bruce in Saint John, N.B. Canada

>I would be very surprised if you were able to find a shop that would let you come in and use their sandblaster. Dosen't matter if the media is glass or sand, a very useful tool but has the potential to be dangerous especially if one has no previous experience with it. I know in my shop our liability insurance did not cover anyone in the shop that was not an employee. Insurance Co. wouldn't even allow customers in the shop to watch the various machining operations let alone operate the machinery. If I were you Andi, I think I would consider going to a tool rental business and renting a sandblaster and a compressor as well. Perhaps you may already have a compressor but don't forget depending on the sandblaster size, some require a large volume of air. Good luck but be careful.

Re: Sandblasting?

#9

Re: Sandblasting?

AndiWolfe

>Thanks for the suggestions. I think I'll check with some of the departments on campus and then maybe the college of art and design. If I have a good summer, maybe I'll be able to invest in the equipment and renovations for my shop.