Hollow form...
Marc Phillips
>Used Randys hollowing tools and also the Sorby Hollowmaster on this one... basically just trying all the different cutters, changing the grinds a little, moving the tool rest up and down, etc... it all seems to be paying off a little now... getting more comfortable with hollowing as I go along... although I still don't really have a set "pattern" as I do with bowls.... but I am sure that will come with time and practice...
Got this one pretty even and fairly thin... about 3/8" except the bottom is little thicker... ran it through all the grits, then Beal buffed.... just wax for a finish... it's 5 1/2" wide and a little over 4" deep.
Thanks for looking...



