Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Sharpening the Ellsworth grind

Posts

Sharpening the Ellsworth grind

#1

Sharpening the Ellsworth grind

Jim Putnam------WebKitFormBoundaryPLAuzaK+dmUDdNnI

>I spent a little time with my Sorby and Tormek jigs last night, but was unable to find a setting that would allow sharpening the complete contour of my new Ellsworth bowl gouge. Has anyone found a system, or the settings that can replicate this profile?

Re: Sharpening the Ellsworth grind

#2

Re: Sharpening the Ellsworth grind *LINK*

Gordon Seto

>It is in the middle of the page:

Bowl Gouge #5

The Jig Setting at #6, which is one imaginary notch beyond #5

Nose Angle: 60 degree

If you use Tormek for turning tools, the TTS-100 set up jig is a must have.


Tormek Jig Setting

Re: Sharpening the Ellsworth grind

#3

Re: Sharpening the Ellsworth grind *LINK*

Fred Holder

>Hello Jim and others interested,

In 2005, I published an article in More Woodturning magazine on how to sharpen the Ellsworth Grind on the Tormek. I have e-mailed Jim a copy of that article in PDF format. If anyone else is having trouble, sharpening the Ellsworth grind on their Tormek, E-mail me and I'll send you a copy of the article.


More Woodturning Website