I have been tasked with doing the research required to get a demonstrator for our club for next year. We are located in Kalispell, MT near Glacier National Park.
I am not sure where to start and what questions to ask. We are a small club and have had two demo over the last several years, Alan Laser and Soren Berger. Both gave wonderful demos and workshops.
Many in the club are apprehensive about the cost.
Do any of you have suggestions as to whom we might approach? I think we can support one day of demo and two days of hands on workshops. Is it reasonable to ask someone to come for that period of time? We would like the person to be a guest in one of our homes while here. Is that reasonable?
Any input as to what to expect and what to stay away from will be greatly appreciated. Also any recommendations as to good demos you have seen will also be apprectiated.
>You might try looking closer to home for a demonstrator who might be less expenmsive, but give you similar quality without the big "name". There is a large woodturning club in Spokane, with several well known woodturners who could do what you want, and they are within driving distance. Contact them, explain your situation, and see what happens.
The other possibility is that you could give a demonstrator a 2-fer. If it could be arranged, they could work you and the Spokane, or one of the other clubs in the mountains on successive weekends, and share some of the costs. You might also consider looking for a qualified woodturner who would be willing to trade a fishing trip for some or all of the demonstration costs.
>Just send them some pics of the Park, I would jump at the chance to see that again. Breathtaking is an understatement. The most beautiful place that I think I've ever seen. Don't underestimate that as a draw for your demo guy/gal.
Last time we were there we stayed a week in the home of the folks that own the hardware store in Whitefish. Great folks, beautiful home.
I'm not a demo person, unless you need to see mistakes, :) but the scenery has got to be worth a lot. Configuring some vacation in with demo time would have to be a consideration..........
Thought about what I'd do in your situation, and came up with a list of a few top-notch turners and excellent demonstrators from around your region that might potentially be less-expensive due to shorter travel:
Trent Bosch - Ft. Collins, Colorado - Carved vessels, hollowing, etc.
You might need to book any of these folks at least 6-8 months (or more) in advance as they are usually in pretty high demand. (Even for the few demos I do, I still ask for at least 3-4 months due to a "dense" personal schedule.)
>Seems like a fair trade to me? I am also a member of a smaller club, but we are hosted by a woodworking school. In the summer, we are lucky enough to have the teachers volunteer to speak to the group. In the winter, they make due with "our members" demonstrating whatever we do best.
I have no doubt that barter would attract someone into waving the fees. Perhaps a long weekend with hosting and a day to see Glacier would be all it takes?
>Go for it, you dont need a big club or a treasury full on money. We do it twice a year for our little club in northern Michigan. We spread the travel expense out among the demo participants and that makes the hands-on sessions affordable by just breaking down the daily fee for the instructor by the number of lathes/students. $50-$60 for an all day demo with a well respected demonstrator is a pretty cheap date, includes lunch. And you cant beat the price of about $100.00 per day of hands-on instruction to really kick it up a notch. That is typical of what I do all over the country. Give me a call and we can chat about possible formats and a risk free registration process. Yes I am booking events way up into 2010 already. Lyle Jamieson
>Skip, my demo experience has been growing steadily - in fact, I am sitting in Phoenix right now as I write this. The dollar figure to bring someone in is not always an accurate gauge of what you will get, or even how much it will cost you. Obviously there is an absolute cost for a given person, but then it all becomes relative. How much do you charge for that person? Can you get enough response at that price for that person? Is it worth the transportation costs for the amount of time you anticipate having that person there? Most of my evening demos are either local to me, or combined with workshops or other clubs. When I travel, the club usually tries to cooperate with another club, or sets up as many classes as they can. I have a whole bunch here in AZ! My point is, if you can distribute your costs, the club can be out little money, or even make a profit on the deal. In my experience, the hardest part sometimes is getting the members to actually commit to coming until the very last minute.
As has already been written though, there are a lot of people who are "unknown" and who are very good at demonstrating who will cost you less. The problem is finding them, and then checking out their bona fides to make sure they can perform. It is one thing to be able to make something well. It is another skill set entirely to be able to communicate it to a group. And with a club that is newer, or which does not have the resources of some big clubs, it is a challenge to bring in anyone with something new, worthwhile, and of interest for the membership.
As for the other things you mention, lots of people have different requirements. Some will sleep anywhere and eat anything you put in front of them. Others have lists that extend to almost 20 pages! Some can drive to get to you, and others will have to fly. Flying me around is usually one of the biggest expenses a club can incur, but it is happening more and more. I am thinking of buying a crate and shipping myself air freight to save some money. ;-) But starting here asking your questions is a good start. I would suggest that you talk with some other clubs, starting with those close (and I mean relatively close) about what they have done, who they have had in, and how it worked out for them. Word of mouth and actual experience goes a whole lot further than any promotional literature or perception from those who have not actually been involved in the process. Good luck with it!
>Skip, I would start off with a written survey, asking each member what type of demo they're interested in. If the answer is primarily bowl turning, that is going to narrow the search . Hollow forms, again the search becomes easier. I think it would benefit us all if each club rated its demonstrators on a scale of one to ten, and kept a list of this on the AAW website. It would avoid mismatches and disappointments. Take the time to contact other clubs; get their recommendations for top-notch demonstrators, and perhaps host a turner with other clubs to defray costs.
>WOW,WOW,WOW. What seemed like a daunting task yesterday after our club meeting is much more in focus after reading all these wonderful responses. Thanks to all for taking the time to respond.
I now have several avenues to explore and will do so in the next several weeks. I would like to have this all settled in the near future so we can concentrate on making the actual event a great experience for all who participate.