Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

They talked me into it aka vac chuck

Posts

They talked me into it aka vac chuck

#1

They talked me into it aka vac chuck

Jeff Willaford

>The chat last week (along with Carole and her setup..and Dick H. ) convinced me to go for it. The vac (Surplus Center) is up and running and I love it. Faceplate with MDF, PVC and foamie works fine. Made a mdf plug (thanks Carole - no lamp rod) for the handwheel on my Jet. Turned a bowl today and the vac chuck made it easy to finish the bottom. I don't care who laughs at me for using a generator for 220. I'll have a shop some day.

Re: They talked me into it aka vac chuck

#2

Re: They talked me into it aka vac chuck

Don Evans

>What exactly is a "foamie"?

Don

Re: They talked me into it aka vac chuck

#3

foamie

Barry Irby

>A piece of foam about 1/8" thick with a peel and stick back on it. About the size of a sheet of paper. Available int he craft section of Walmart. Maybe elsewhere. Easy, accessible foam to seal the chuck with. You can also use any closed cell foam, such as the pad that goes under laminate flooring or liner for tool drawers or Neoprene. Some of these may be harder to find and generally do not have the sticky back already on them. And you may have to buy far more than you need. Whatever you use has to be closed cell to not let air leak through and should be made of something that does not stain or mark the work or leave residue that affects the finish.