Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Myrtle Box

Posts

Myrtle Box

#1

Dick Hines

Myrtle Box

Dick Hines

>Here is a new box I just completed. It's myrtle burl with a little turquoise dust in the cracks. I used #6 ground wire for the handle. Copper does not turn well! I had to use a parting tool. The balls the handle rest on are also copper. Then a couple coats of patinate chemical.

It only took me about 4 hours and 3 drill bits and a lot of bad works to get the handle finished.

Comments welcome.


img

Re: Myrtle Box

#2

Re: Myrtle Box

Jim Shaver - Oakville, Ont

>WOW Dick,

Love the whole box design and details, sweet work!

Take care, Jim

Re: Myrtle Box

#3

Re: Myrtle Box

Don Evans

>Very nice job. I like it alot.

What chemical did you use and where did you purchase it?

Don

Re: Myrtle Box

#4

Re: Myrtle Box

paul waddle

>Magnificent! Tell us about some of the works(words).pw

Re: Myrtle Box

#5

Very Cool Myrtle Box

Gil Jones....GA

>It rather looks old and new at the same time, and I am sure the "works" helped out a lot (they help mine).

Re: Myrtle Box

#6

Mike Stafford

You didn't.....

Mike Stafford

>you know, er, uh, pee on the handle to get it that color did you and just call it patinating chemicals?

This is a fabulous box Dick. I like the way you married the handle color with the color of the turquoise in the wood cracks. The shape is great.

How did you mount the handle to the balls?

Did you try using a file to taper the copper wire on the lathe instead of using a turning tool?

Re: Myrtle Box

#7

well I believe it was worth it- good job

john lucas

>

Re: Myrtle Box

#8

Re: You didn't.....

John K Jordan

>>... a file to taper the copper wire...?

Another good way to shape copper is to put it on an anvil and beat, er, tap it with a hammer. If a lot of shaping is required, to prevent cracking copper can be annealed with a torch if it becomes work hardened.

JKJ

Re: Myrtle Box

#9

Your balls are copper?

Barry Irby

>Did you make them or buy them?

Great looking box. Really nice work.

Have you tried hammering the copper to taper it. I have not tried it, but I bet you could do a lot of it with a hammer and then file it or turn it smooth. Or just leave it hammered.

Re: Myrtle Box

#10

Most impressive, Dick

Cyril Griesbach

>

Re: Myrtle Box

#11

Dick Hines

Re: Your balls are copper?

Dick Hines

>The balls are turned and have a tenon on the bottom that are glued into holes drilled into the top. I tapered the handle by holding the wire to a belt grinder. The handle is glued with CA to the top of the balls and another piece of wire is inserted through holes, broken bits,into the balls.

I used chemicals Mike. :)

Re: Myrtle Box

#12

Mike Stafford

How much heat?

Mike Stafford

>John, how do you know when you have applied enough heat? When is enough enough? Is there a color change or some other indicator?

Re: Myrtle Box

#13

Now Dick...

Barbara Gill, Remlik VA

>we all realize that your response to Mikes question is not necessarily one to relieve his mind. Chemicals??? LOL

Re: Myrtle Box

#14

Bob Moffett

Re: Myrtle Box

Bob Moffett

>Very nice piece!! I think you outdid your last one. I really like it.

Re: Myrtle Box

#15

Dick Hines

Re: How much heat?

Dick Hines

>Mike I used to do bonsai and I used annealed wire to wrap the limbs and branches on my trees all the time. When copper wire is anneled it changes the cells in the wire. When it is wrapped or worked on is will go back to the hardness it was.

To anneal copper the wire has to be heated until is is red hot. Then set aside to cool. No water dunking. I used to do it the camp fire when we went camping. I figured there was reasion to waste a good camp fire just cooking hot dogs.

The wire will turn a dark brown black when anneled. If a clear finish is sprayed on it may sat dark. I have a fix for that though.

Re: Myrtle Box

#16

Re: Myrtle Box

Carole Valentine

>You are into a good series here, Dick. I normally don't care for the turquoise fill, but with the verdigris copper handle, it looks quite nice. Keep it up!

Re: Myrtle Box

#17

Re: Myrtle Box

Jeff Willaford

>Very nice. I guess phone wire would not have had the same effect for a handle.

Re: Myrtle Box

#18

Dick Hines

Re: Myrtle Box

Dick Hines

>It is phone wire. #6 ground wire, used to ground and bond switches.

Re: Myrtle Box

#19

Re: How much heat?

John K Jordan

>I heated with a propane torch until red. Can't remember what I was making, but for some reason I was hammering heavy-gauge copper wire to fan out the end.

At a turning club demo on metal spinning the guy heated a copper disk with a propane burner similar to what comes with a turkey fryer. He had to re-anneal repeatedly since copper evidently work-hardens quickly.

Some people dunk in cold water after heating; some don't. I understand that unlike ferrous metals, the speed of cooling doesn't matter. If you quench you can get back to work quicker. A piece of wire should cool rapidly anyway.

JKJ

Re: Myrtle Box

#20

And Superman's would be...?

Bob Macgregor

>