Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

No sanding required...

Posts

No sanding required...

#1

Steven Antonucci

No sanding required...

steve antonucci

>This maple was at least 5' in diameter when I came across the sections on the ground. I spun around and drove home to get my chainsaw, and loaded the truck twice before collapsing in exhaustion. I figured that the rounds weighed close to 800 pounds each, and they weren't going anywhere. I was wrong. The next weekend, the entire stump had been cleared. I still have 200# or so of this wood, and I am slowly getting through what nature has provided.

This work represents a new venture for me. I am trying to focus on cutting techniques as part of the "making process", to produce the best surface without sanding. I probably should have started with an easier wood, but then again, if I can make it work with this spalted maple, I can make it work with any wood. I do not plan to sand or finish it (maybe just an artists acrylic to protect the surface if I can keep the color exactly the same). The outer surface is cut with a skew to keep the softer parts intact and keep the harder parts from getting polluted with sanding dust.

Comments welcome.


img

Re: No sanding required...

#2

Beautiful Work Steve!!

Greg Haugen

>

Re: No sanding required...

#3

Ditto: very nice indeed.

john lucas

>

Re: No sanding required...

#4

Re: No sanding required...

Ken

>WOW, beautifull figure,to bad you didn't get it all,lesson learned,he who hesitates looses.

Re: No sanding required...

#5

Ummm...WOW!!

Don Orr

>Not much else to say.

Re: No sanding required...

#6

Re: No sanding required...

Randy G

>Very nice Steve... great work as always.

Re: No sanding required...

#7

Rob Wallace

Re: No sanding required...

Rob Wallace

>I'll bet if you headed 'cross the river' and down to David Ellsworth's studio, you'd find the rest of the wood there.....!!

Nicely done Steve!

Rob Wallace

Re: No sanding required...

#8

Steven Antonucci

Openings are too big to be confused with David's

steve antonucci

>Next bunch will be much smaller openings. I need to make some more tools to be able to make smaller holes. No one would ever confuse my work with his side by side :-)

Re: No sanding required...

#9

ditto, very nice

robert davis

>

Re: No sanding required...

#10

This wouldn't make decent firewood but...

Doug Thompson near Cleveland

>has amazing figure for turning. Nice find...

Re: No sanding required...

#11

Dick Hines

Re: This wouldn't make decent firewood but...

Dick Hines

>One man's junk is another man's hollow froms. They look great. Glad you got to save the wood.

Re: No sanding required...

#12

Ditto Ditto, very nice!!

Jim Shaver - Oakville, Ont

>

Re: No sanding required...

#13

Re: No sanding required...

Jorge Castaneda~Downeast Maine

>Good going Steve, full steam ahead!

I am too in a quest to achieve surfaces that need no sanding and I am having good luck with my Thompson's detail gouges.

Thanks for showing

Jorge