Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Have vac, will turn!

Posts

Have vac, will turn!

#1

Have vac, will turn!

Carole Valentine

>Jeff put my vacuum system together today and it works great! It will pull much more than I need (28") and the little Picolino VTE 3 pump is quiet as a mouse. I bought one chuck when I bought the HoldFast but I like the one I made with MDF, PVC pipe and a Foamie better. The seal is thicker on the store bought one and allows it to flex a bit.

A huge thanks to Jeff Willaford who put it together and to Pete Kekel who donated the pump!

Re: Have vac, will turn!

#2

Re: Have vac, will turn!

Jim Shaver - Oakville, Ont

>Nice to hear Carole,

I hope you were able to use the parts I sent you as well.

:-)

Take care,

Jim

Re: Have vac, will turn!

#3

Rob Wallace

Re: Have vac, will turn!

Rob Wallace

>Welcome to the Club!

Maybe we should make up T-shirts with the following slogan:

"Vacuum-Chuckers United! We suck!"

?

Rob

Re: Have vac, will turn!

#4

Never received parts from you, Jim

Carole Valentine

>I bought a HoldFast adapter from Packard.

Re: Have vac, will turn!

#5

I Love Mine

Barbara Gill, Remlik VA

>I bought it from Johnny Tolley years ago.

Re: Have vac, will turn!

#6

Re: Never received parts from you, Jim

Jim Shaver - Oakville, Ont

>Hi Carole,

I sent them last summer, I can't understand why you didn't get them.... that is very strange.

Take care,

Jim

Re: Have vac, will turn!

#7

Re: Never received parts from you, Jim

Carole Valentine

>I think if you look around your shop, you may find them. You said in an email that you found them sitting in your shop after you thought you had sent them, then you went off to France or somewhere and probably forgot when you got back. That's ok...we are all getting to that age. ;) Maybe someone else can use it. Thanks for the thought. :)

Re: Have vac, will turn!

#8

Re: I Love Mine

Ken George

>Johnny Tolley is a name I remember. Weren't there brothers by that name that used to post here? Are they still around?

Re: Have vac, will turn!

#9

Re: Have vac, will turn!

Don Orr

>Congrats Carole-you will enjoy this device very much. I finally managed to cobble together a simple setup myself and boy is it nice to work with. I made all my chucks from MDF soaked in water borne poly direct threaded for the spindle and PVC pipe. I have 2" and 4" now and have a piece of 3" PVC to make more if I want to.

Enjoy !

Happy St. Patrick's Day !

Re: Have vac, will turn!

#10

Re: I Love Mine

Barbara Gill, Remlik VA

>The Tolley men are twins. I see posts by them every once in awhile.

Re: Have vac, will turn!

#11

Re: Have vac, will turn!

Woodie49

>How do you make your setup?

Thanks

Re: Have vac, will turn!

#12

Re: Have vac, will turn!

Carole Valentine

>I'll take a picture tomorrow if I have time. It's actually pretty simple once I saw it all done. Jeff had to wire my pump, fashion a connection cover, which was missing, install some fuses and a switch. That cover was the time consuming part. You wouldn't have to do that with a pump you bought. The other connections are a brass cross fitting with a ball valve, a vac gauge and two quick connect fittings for the hose from the pump and the hose from the vacuum adapter. The cross was 3/8" but we stepped one arm down to use the 3/16"ID hose that came with the HoldFast because it was more flexible than the 3/8" hose.