Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Just to put the lie to the rumors...

Posts

Just to put the lie to the rumors...

#1

Just to put the lie to the rumors...

Gary Evans Tallassee, TN

>that I don't know how to make round things. I realized the other day that I didn't have a wooden mallet at the store. I started casting about for suitable stock and found some osage orange that would suffice.

Granted the details are crude, but that will improve with practice. After all, this is the first spindle work I've done in a couple of years.

The head is basically 4"x2 1/2". The handle is 9" long. The handle has a wedged, glued tenon holding it in the head.

Gary


img

Re: Just to put the lie to the rumors...

#2

I'm building one tomorrow

john lucas

>I was trying to come up with a project that was perfect for theading and thought I would build a Mallet. I have some Osage so it might just be made out of that.

Re: Just to put the lie to the rumors...

#3

Re: I'm building one tomorrow

paul waddle

>Threading the inside hole may present a challange or are you going to use a Beal tap??pw

Re: Just to put the lie to the rumors...

#4

Re: Just to put the lie to the rumors...

Texian

>A fine looking bonker.

Re: Just to put the lie to the rumors...

#5

Re: I'm building one tomorrow

john lucas

>I'm going to thread the inside. I will size the tenon so my inside threader will fit with a little extra clearance. I thought about using an offbrand tap and threader that I have but the threads are really course and I don't have a bottoming tap. The Beale looks like it is more of a bottoming tap. I'm tempted to order one but cost +shipping gets a little high. Maybe next time I place a bigger order I'll add one on.

Re: Just to put the lie to the rumors...

#6

My wife...

Gary Evans Tallassee, TN

>has been amazingly polite to me since I showed it to her. 8^]

Gary