Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Bowl Startled - And Runs Away

Posts

Bowl Startled - And Runs Away

#1

Bowl Startled - And Runs Away

charlie belden

>I've been playing with actual movement in some of my turned pieces - piano wire - ball and socket joints - etc.. Yesterday, while at Radio Shack I picked up something that may end up being part of something "different" - a piece which - when exposed to a sudden semi-loud noise - like the clap of hands, or a tap on whatever it's sitting on - might scurry away.

What I picked up - for $12.95 - was a little robot, or larger micro-bot - with 6 legs - and some sort of sound/vibration detector. When the little power switch is move to ON the thing scurries foreward - for about two to three seconds - and stops. Any semi-loud noise will frighten it into scurrying off - sometimes in the opposite direction of its last move.

There seems to be some small program in one of the chips on top which also sends it off in one direction, then either start turning - always to the left - or stopping and reversing direction. It's sort of like a robot roach - a little bit creepy.

The idea of a small bowl, on a turned base - suddenly walking away when a loud sound occurs near it . . .

Re: Bowl Startled - And Runs Away

#2

Ya got a sick mind, Beldon.

Al Neighbors

>Love it!! :o)

Re: Bowl Startled - And Runs Away

#3

My Shop Cat Would Love It

Texian

>Gotta get one of those for Missy.

Re: Bowl Startled - And Runs Away

#4

Re: Bowl Startled - And Runs Away

john lucas

>Charlie I make hand mirrors and my son had some little cars that when rolled over would make the sound of a crash that sounded just like breaking glass. I always wanted to break the glass in one of my mirrors and put that device in the mirror body, so when you picked it up to look in the glass you would hear breaking glass and then see the broken glass. I thought it would be hilarious but I never did it.

Re: Bowl Startled - And Runs Away

#5

Re: Bowl Startled - And Runs Away

John K Jordan

>Two issues: the weight of the piece and the table/shelf space needed to allow the motion. Another thing I'd consider is to fasten tendrils (carved) or wires to the legs and mount it inverted inside something so the sound would cause motion. I can imagine the "legs" supporting something, such as a wooden sphere, which would move as well, but that possibility would depend on the actual motion available. I've got some little bots with six legs that crawl around and I think it would work with that kind of motion.

I always wanted a sound-activated device that would pulsate with glowing colored light. Drop that into a closed form, perhaps painted black on the outside.

JKJ

Re: Bowl Startled - And Runs Away

#6

Re: Bowl Startled - And Runs Away

charlie belden

>I suspected that there were far more galloping crazies, or at least more than just a few unconventional design ideas floating around, in this group. Suspicion confirmed.

John L:

With a "You Break It - You Buy It" sign prominantly displayed above the Special Hand Mirrors . . .

What an evil, ingenious idea! It'd engage sight as well as sound - and the surprise factor - it'd be priceless.

John K J

The weight issue is certainly a potential constraint. This little "bot" doesn't have much ooomph. But dry popla, turned fairly thin, weighs almost nothing. A great motivation for learning to turn really thin. I've learned to turn to pretty small diameters - 0.02" - in poplar - so turning really thin wall thicknesses can't be that difficult right? (WRONG).

Hadn't thought of turning this little critter over and have it foot juggle a turned sphere.

The idea of putting it inside a hollow form, preferably one with low primary stability and high secondary stability (super egg), out of sight, and have its legs make scratching noises and cause movement - when sound activated! Solves the potential problem of the piece "walking" off the edge of a display shelf or table and it could be a "drop in" - no need to turn any special area to hold it - though there is the issue of changing the batteries so it would have to be semi-easily accessable.

And the idea of a sound and/or motion activated glowing or flashing LED inside a semi-hollow form. Flashing or blinking battery powered LEDs are everywhere and inexpensive - and the sound/motion activated switching is out there as well. Hmmmmm.

The idea of combining the very old technology of turning with some of the new, small, inexpensive, readily available technology opens up new multi-media avenues to explore.

Neander - meet - Techno Geek

Collaborate?

We certainly live in interesting times!

Re: Bowl Startled - And Runs Away

#7

Re: Bowl Startled - And Runs Away

Frank C. Joseph

>I love it,And I think I will try it also, thank you Frank

Re: Bowl Startled - And Runs Away

#8

Re: Bowl Startled - And Runs Away

Gary Evans Tallassee, TN

>Hi Charlie,

I've had bowls get scared of the sharp tools and jump off the lathe. 8^] I never thought of it as something I wanted to encourage.

Interesting idea. I'll be looking for what you come up with.

Gary