Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

steel for coving and pyramid tools *LINK*

Posts

steel for coving and pyramid tools *LINK*

#1

steel for coving and pyramid tools *LINK*

Dick Coers

>Since our Woodcraft closed, I've had to find an alternative weekend spot. So far it's Harbor Freight. Last weekend I spied this punch set and picked one up. Ground one into an 5/32" coving tool and a 5/16" pyramid tool. They seemed to take a while to grind, so they feel pretty hard. Shouldn't be too hard since they are made to strike. They are made in India, and the longer punches are 8" long and have 3 1/2" of "cutter" length. With the round handles on the long punches, you could easily put them in a wood handle. The mildly bad news for me is that they are $9.99 on the web site, I paid $13 after a coupon I had. So you can get 8 longer tools and 5 shorties for $10 plus shipping. Kinda tickled.


punch set

Re: steel for coving and pyramid tools *LINK*

#2

Re: steel for coving and pyramid tools

Terry Quiram

>Thats a whole lot cheaper than buying drill blanks through Enco. Glad you posted this cause I forgot you told me about these. Danged CRS!

Re: steel for coving and pyramid tools *LINK*

#3

Re: steel for coving and pyramid tools

Fog Tanner

>I have been using some 3/8" round stock I got from Doug Thompson a few years ago to make round skews and pyramid tools. They are the same steel as his 3/8" gouges, with the same hardening process as the gouges. They hold an edge forever and are my go to tool for fine finish cuts on some pieces like finials. They are long enough to have a skew on one end and pyramid tool on the other if you use them in a handle with a set screw.

Fog