Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Clean Inlays

Posts

Clean Inlays

#1

Clean Inlays

Don Evans

>Someone in past has made very nice looking inlays of items that were encased in some type of epoxy material.

Anyone care to pass on some of the tips to success. What type material was used, epoxy (what type), brand etc.

Most that I remember were one's made for pen turning, but I would like to use the idea for other turnings.

Any help what would save lot of lost time experiementing would be greatly appreciated.

Now I also remember there were some made for bottle stoppers, round one's for top of them.

As most epoxy has a yellow tint, I'm wondering what could be used to make these type inlays with a material that would remain clear.

Don

Re: Clean Inlays

#2

Opps, should have been CLEAR inlays

Don Evans

>

Re: Clean Inlays

#3

Re: Clean Inlays

john lucas

>Don I have used casting resin called Cast-n-craft. There are a lot of different brands. I just picked one and tried it and it worked well. The biggest problem I had was suspending things inside. The either wanted to sink or float so i had to pour it in 2 sections and the lines shows. It's subtle but it's there. I didn't do any other experiments with it for suspending items. Mostly I use it to fill recesses in my hand mirrors where I glue down other objects and thin fill this whole area with resin.

Re: Clean Inlays

#4

Re: Clean Inlays

Ken George

>Check this web site: http://www.woodturningonline.com/Turning/Projects/bottlestoppers.html

Ed does some outstanding things with casting resins.

Ken

Re: Clean Inlays

#5

Brad Vietje

Ed Davidson has done some real nice work.

Brad Vietje

>

Re: Clean Inlays

#6

Re: Clean Inlays *LINK*

Ed Davidson (Colorado Springs)

>Don,

For inlays, I prefer to use thin CA with glitter or crushed stone. There's a link to my how-to page where you'll find several videos and photo tutorials at the bottom of this post.

There's also a pretty cool bowl turning process using crushed stone and epoxy (see bowl photo below) called "outlays", originated by Larry Fox. Here's a link (you'll have to cut-n-paste) to his DVD: http://www.arizonasilhouetteinc.com/cart/index.php?main_page=product_info&cPath=72&products_id=1978


img

Video Tutorials

Re: Clean Inlays

#7

Re: Clean Inlays

Ed Davidson (Colorado Springs)

>Embarrassed...re-read your question (clear vs. clean inlays). 3-D cast polyester resin is what you're asking about. See pic below. Drop me a line if you�re looking for something special to be cast in clear resin.


img