Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Carving platters while still chucked ...

Posts

Carving platters while still chucked ...

#1

Carving platters while still chucked ...

George in Minnesota

>I am trying to build a little carving station while I am trying to experiment with engraving and burning; I am not real interested to invest $100 + in the different articulated systems at this time. Is there a source for the male threaded hardware that would match my spindle size (1 x 8TPI)? Went to the big box stores which was no help.

Thanks

George

Re: Carving platters while still chucked ...

#2

Re: Carving platters while still chucked ...

Texian

>George, you could buy a 1" x 8 bolt and clamp it in your bench vice, or make a wood stand w/ suitable 1" hole appropriately located therein, or leave it on the lathe and use the spindle lock, or - - -

Re: Carving platters while still chucked ...

#3

Re: Carving platters while still chucked ...

GalenV in Iowa

>There are a lot of Fastenal locations in MN so you should be able to fine either 1"-8NC bolts or all thread.

Galen

Re: Carving platters while still chucked ...

#4

Re: Carving platters while still chucked ...

john lucas

>George Ace Hardware locally has 1"x8 all thread rod and usually has some 1" x 8 bolts. I don't think I have any 1"x8 right now or I'd just send you a chunk.

Re: Carving platters while still chucked ...

#5

Re: Carving platters while still chucked ...

George in Minnesota

>There is an ACE around the corner; I will give it a shot. I keep hitting the big box stores (I am still holding a Christmas git card); I guess it will be good for fertilizer or something when spring ever does show up here in Minnesota. We are supposed to be getting more snow tomorrow.

Thanks

George

Re: Carving platters while still chucked ...

#6

Re: Carving platters while still chucked ...

paul waddle

>God Idea for holding work. Sure,1"-8 is common. I thought about this once upon a time,but I haven't carved anything for quite a spell. Be sure and let us see your vice and set too. pw

Re: Carving platters while still chucked ...

#7

I have some.

john lucas

>George I just checked and I do have a 1"x 8 all thread rod. Send me an e-mail if you want a chunk.

Re: Carving platters while still chucked ...

#8

Re: Carving platters while still chucked ...

Dennis Yoder

>George, My local box carries 1 x 8 all thread but I have to go to a real old timey hardware store to get 1 x 8 bolts. Dennis Y

Re: Carving platters while still chucked ...

#9

Dick Hines

Re: Carving platters while still chucked ...

Dick Hines

>John, do you know if they carry 1 1/4" X 8 all thread? You just gave me an idea.

Re: Carving platters while still chucked ...

#10

Re: McMaster-Carr carries 13 different lengths

Al Crandall

>Paste http://www.mcmaster.com/#threaded-rods-and-studs/=x7a86 into yor browser window and you will have a choice from 6 inches to 12 feet of fully threaded rods in 1 1/4-8 thread size delivered to your doorstep.

Re: Carving platters while still chucked ...

#11

Here is what I did... *LINK*

keith zimmerman, Normal IL

>What I did was get a 5/8" to 1x8 chuck adapter for the shopsmith from PSI. The shopsmith adapter is 5/8" ID and smooth, and it fit into my tool rest banjo. I cut a piece of 5/8" rod about 6" long and inserted it into the banjo with the adapter on the top end.

I can mount my chuck on it and have full rotation available if I need it.

keithz


adapter