Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

The natural edged bowl as promised...

Posts

The natural edged bowl as promised...

#1

The natural edged bowl as promised...

Marc Phillips

>I followed the suggestions given on my previous post and it really went a lot smoother... there was still some wobble, but not a lot...

I cut up an old bathroom mat... rubber on one side, carpet on the other... and stuck a piece of it over a turned chunk of wood that I tapped with the Beal bottom tap I have that does a 1" X 8 tpi... I am guessing the wife will notice the missing mat, but she is working late today so I am safe for a couple of hours :)

Finished with Golden Oak Briwax and "buffed" with wax brushes....

Thanks for the help... I was able to get in tight with the 1/4" fingernail spindle gouge so there was just a tiny little piece to break off and hand sand...


img

Re: The natural edged bowl as promised...

#2

Re: The natural edged bowl as promised...

Cyril Griesbach

>Nicely done, Marc. I guess you've answered my question on how the bottoms were working out.

Re: The natural edged bowl as promised...

#3

Re: The natural edged bowl as promised...

Paul waddle

>Pls post picture of your setup for holding.. Thks,pw

Re: The natural edged bowl as promised...

#4

Re: The natural edged bowl as promised...

Donna Banfield

>Well done, Mark.

Re: The natural edged bowl as promised...

#5

Re: The natural edged bowl as promised...

john lucas

>Mark I use a rubber sink stopper and just put it over my chuck. Then bring up the tailstock to center the bowl that turn them that way. The rubber sink stoppers don't have much give so the bowl sits steady and it has enough friction to drive it.

Re: The natural edged bowl as promised...

#6

Re: The natural edged bowl as promised...

Marc Phillips

>Thanks John... I will give that a shot on the next one... for some reason I thought I had to have a lot of surface area in order to drive the bowl and keep it centered... not the first time I had it wrong!

Re: The natural edged bowl as promised...

#7

Re: The natural edged bowl as promised...

Jim Rutten

>My bank gives away rubber things that are used to open jars. Think they have started to wonder why a grab a handful anytime I go in? They are great between bowl and jamb chuck.

Re: The natural edged bowl as promised...

#8

Dick Hines

Re: The natural edged bowl as promised...

Dick Hines

>Great bowl Marc. You have the natural edge bowls under control. And you kept the bark on also.

Re: The natural edged bowl as promised...

#9

Brad Vietje

No Pic for me -- can everyone else see this?

Brad Vietje

>

Re: The natural edged bowl as promised...

#10

Pic shows for me...

Marc Phillips

>... but here it is again.


img

Re: The natural edged bowl as promised...

#11

Brad Vietje

Got It

Brad Vietje

>Nice bowl, Mark. Now I can see it in both places -- (???) Thanks for re-sending.

Safe spinning,

Brad Vietje

Newbury, VT