Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

bowl turning demos

Posts

bowl turning demos

#1

bowl turning demos

john lucas

>I find it interesting that everyone seems to want what they call traditional turning however they go to see demos covering all sorts of other things. I'm rarely asked to do just a bowl turning demo. Everyone seems to want to see things like carving, adding Inlace and colored epoxy, Inside out turning and other "non traditional things" done to the turnings. This tells me that there is a lot of interest in these other areas and I see lots of turners using these techniques after we share them.

It seems like this is Ok as long as you don't take it to the level that they can't copy it. For example beads and coves on bowls are Ok, burning the rims is OK as well as filling in defects with colored epoxy. Maybe even some simple pyrography. However if you carry those skills to the level of a Binh Pho piece or Jacques Vessery then it's called Art and has an evil name.

I do think we need to teach basic bowl and spindle turning because we get a lot of new turners in the clubs however I don't think we would keep the members if we turned a bowl every meeting.

Re: bowl turning demos

#2

Steven Antonucci

What I've done

steve antonucci

>Once every quarter, we have a "skills" topic. Usually, it is geared towards the better turners helping the newer turners develop basic proficiency with something. I've done sharpening, basic bowls, and in two weeks, I will be teaching "the skew".

Generally speaking, I think you are right. Cutting a bowl is not a very exciting demo for a club to see over and over. I do think that the bowl illustrates a lot of very important topics to the beginning turner, and invariably, it is what I use to sharpen skills in our hands on sessions.

At the end of the session, we have yards of shavings to clean up, and dozens of people still hanging around. We maintain a lot of interest because it is hands on AND a great teaching tool (bowl turning).

A good club,like the AAW magazine and membership can maintain interest simply by positioning the articles better. There are folks who want to look at bowls, folks who want to make bowls, and folks who will decorate a bowl ad infinitum. One well written article will appeal to all of them.

My "bowl turning demo" (which I have never formally delivered to our group) is a mix of story about reading the wood, grain direction, cutting techniques, sharpening, shaping, logic, and passion. I talk about cutting the bowl for 20 minutes, and then cut it in 2 minutes. I turn fast (almost no one fights for the front row seats anymore :-), and there's a lot of wood coming off very quickly. I will almost always illustrate the importance of of being on bevel by cutting the interior one handed (a little bit of showing off, but more about illustrating how controlled it can be to a new turner who has never seen it done). I OBSESS on cutting cleanly because I think most demos revolve around removing wood quickly vs. cleanly...

But invariably, I know that 80% of my audience is just looking to go from beginner to that next step. So that's why I demo to THEM...

Steve

P.S. I would be bored if every club meeting was a name turner showing me his/her technique for whatever too... I like a little of this and some of that...

Re: bowl turning demos

#3

Re: What I've done

Barry Elder

>John, we are a relatively new club and have many new members. One fellow became enamored with woodturning while on vacation as he visited a woodturning show somewhere in Wisconsin. When he got back to Florida he joined us and participated in several demos by one of our artist-woodturner-carver members with over 30 years of experience. He then went home to begin turning hollow forms and proceeded to blow up every piece of wood that he had. End result is extreme frustration and disappointment and now he has stopped doing any woodturning. His expectations far exceeded his skills and patience.

I feel like this is the backlash from the "artistic" bent that is so prevalent today. So many of us do not have the skills or experience to do this type of work that maybe we are a little envious of those who are so far ahead of us. Perhaps someday my dream will include exotic pieces of art but first I have to discover what I have today.

Re: bowl turning demos

#4

we also scheduled a "basic skills" night this year

John K Jordan

>

Re: bowl turning demos

#5

Re: What I've done

john lucas

>Barry I'm working with a student right now who has that very problem. He thought he could master bowl turning in one day. He cut through several and got some nasty catches while at home. I told him to just slow down, relax and take his time. He has since turned 2 really nice bowls. He's been turning for a whole week now. He promised he would leave me alone for a few days (he called every night)so I probably won't hear from him until Sunday (it's been a whole day without a phone call). It's really nice to have someone so enthusiastic.

I wonder if we are doing wrong by doing a bowl turning demo in an hour. It takes the average new turner about 4 or so to do a small bowl. I know I go through the same thing when hollowing. I watch John Jordan hollow a vessel in an hour and he's wasting a lot of time talking. It takes me much longer because I don't do very many. Probably the same thing you are talking about.

Re: bowl turning demos

#6

Re: bowl turning demos

robo hippy

>I have done several bowl turning demos. They seem to be in demand, especially before the Empty Bowls auction that the local food bank does. Since I am planning on doing a bowl turning DVD some day, it is good practice for me as well. It seems that the clubs I am active in always rotate the bowl turning demos because we all do things differently. One chapter in my DVD will be 'Things that make your bowl explode'. It seems that there is always a lot of emphasis on what to do as you turn, but not much on what problems you will run into, and how to prevent them.

robo hippy

Re: bowl turning demos

#7

Re: What I've done

Peter Hyde

>I think John has a very valid point of view here. So often as beginners it's easy to dream but the road is often long and bumpy. I still have an ambition to turn a flawless bowl. One that has perfect form, clean crisp details, no wood imperfections, grain that blows you away and a finish that you just have to hold. 8 years and still trying :-)

Re: bowl turning demos

#8

Re: bowl turning demos

Mike Nelson

>Great subject, I haven't done a demo yet, except to show-off to my wife how long a streamer I could cut but I do have a reminder of what not to do. Back when I used a face plate with screws, half of a 3.5X12 chunk that I hadn't started to hollow, stuck in the ceiling in line with my head had I not moved it a fraction before! Moral, never forget the last thing you were turning was a fenial at high speed!