Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

lathe speed and wood type

Posts

lathe speed and wood type

#1

lathe speed and wood type

john lucas

>I was turning some olive wood tonight and thought I would play with faster speeds. This wood is quite hard but cuts very cleanly if you let the tool cut at the proper speed. Speeding the wood up helps in this case. It lets you move the tools at a more moderate pace which not only helps the shape but lets you move the tool at a pace that cuts very clean. Of course what I consider fast and what others consider fast is different. I was using the powermatic on the low speed setting and turned all the way up. I didn't look up the speed but believe it was below 1500 rpm.

I hope you can see it in the photo but this is straight off the tools. I used the Thompson skew and Detail gouge sharpened on a 100 grit wheel. The wood is almost polished. 400 grit actually dulled it but I had 1 tiny area that required 220 to get rid of some vibration marks. 600 grit brought it back to what it was straight off the tools. Nice wood.


img

Re: lathe speed and wood type

#2

Re: lathe speed and wood type

paul waddle

>Looks good John! I was turning as fast as I thought it was safe to do today,but couldn't prevent tear out on some walnut crotch. I had to do just the opposite of you,slow lathe down and start with 80grit and work back up to 400. I'm not a pro,but wild grain is a law unto its own,ea pc can be different. pw

Re: lathe speed and wood type

#3

Re: lathe speed and wood type

john lucas

>Paul Every once in a while when turning crotch wood I find I have to cut what seems like uphill with the grain to get a clean cut. When you notice that you are having a problem area try cutting in the opposite direction or even with the lathe in reverse. Swirly grain goes in all directions and is hard to read. Take a shallow cut trying different speeds, cutting directions, and maybe even a different tool.

I usually use a lubricant(paste wax) and use a freshly sharpened tool first before I do the above.