Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Reusing caked Anchorseal

Posts

Reusing caked Anchorseal

#1

Reusing caked Anchorseal

Gary Evans Tallassee, TN

>Hi all,

I found a way to use the thickened layers of dried Anchorseal that you get inside a plastic container. I use a red coffee container with the little cast-in handle like my buddy JKJ had suggested.

Two days ago I started turning an open, green cedar bowl for some friends to pay them back for the tree they gave me. The first blank was really pretty, but I managed to demolish it when I was about half way into hollowing the inside. Should have been around 7" diameter and 7 or 8" high. Now that one will end up around 7x4.

The second blank has behaved quite well, though I've not quite finished turning the outside. When I had to stop turning the other evening, I needed something to seal the outside of the blank.It was still quite green and I was looking at several days before I could get back to it.

I had recently cleaned out the inside of my Anchorseal container so I thought about rubbing some on with the lathe turning. It gobbed up pretty good, but I'm taking off at least another 1/8", so it should all disappear.

I'll report if there are any ill effects.

Gary

Re: Reusing caked Anchorseal

#2

Re: Reusing caked Anchorseal

John K Jordan

>Since anchorseal is just wax, water, and surfactant to keep the wax in suspension, any way you apply it should work. I suspect that caked anchorseal could be re-emulsified with water and agitation, perhaps with the help of a little heat, but I haven't tried it.

Bring those logs to saw and I'll fill up your container!

JKJ